Stria Lithium Inc. announced promising assay results from the first two drill holes at depth on the Pontax Lithium Project in the James Bay region of Québec, Canada. Assays include 10.2 m (true width) at 1.34% Li2O, and a doubling of the depth of known mineralization to 230m. These results further confirm previous exploration activities on the site and are only the first results of 14 holes drilled to date, totalling 3,858 metres, as part of an aggressive 15,000-metre definition and exploration drilling program now under way on Stria's Pontax property in the west-central Eeyou Istchee James Bay (EIJB) Territory. A winter road has been opened from the main highway to the Pontax site, and mutiple drill rigs are now on site with the aim of establishing a maiden resource by mid-2023. Assays from the remaining 12 holes are currently pending at the laboratories. The drilling program at Stria's Pontax property is being financed and conducted by Stria's project partner, Cygnus Gold Ltd. of Australia, and has been designed to systematically step out from known mineralisation at Pontax Central - an extensive spodumene-bearing pegmatite swarm which outcrops over 700m of strike. Significant intersection results from the latest drilling include; DDH975-22-027: 2.82 m (4.3m of core length) @ 1.84% Li2O at a depth of 158 metres(from 227.6m to 231.9m); 6.04 m (9.21m core length) @ 1.44% Li2O at a depth of 172 metres (from 247.1m to 256.3m) 5 minor intervals of true width between 1.51m and 2.02m @ 0.84% to 1.46% Li2O; Cumulative true thickness of mineralized dyke of 21.4 metres. DDH975-22-028: 3.44 m (5.7m of core length) @ 1.35% Li2O at a depth of 144 metres (from 194.3m to 200.0m); 8.54 m (13.3m of core length) @ 1.34% Li2O at a depth of 212 metres (from 300.2m to 313.5m); 3 minor intervals of true width between 1.08m and 1.55m @ 0.67% to 0.82% Li2O; Cumulative true thickness of mineralized dyke of 17.9 metres; True thickness, assuming the dykes are dipping -85 to the NNW; Weighted average using a cut-off grade of 0.5% Li2O on spudumene dyke only, excluding lithium bearing wallrock (FeO > 5%), a minimum true thickness of 1 metre, no external dilution, and wallrock internal dilution set at 0% Li2O. Drilling was conducted with a single heliportable rig by RJLL Drilling Co. from Rouyn-Noranda and
supervised by IOS Services Geoscientifiques Inc. Collar location was measured with a high resolution GPS Geode device, while downhole deviation was measured with the use of a Reflex device. Core, NQ in diameter, has been logged on site and expedited by road carrier to IOS facilities in Saguenay, Quebec, for sampling and storage. Core samples were cut in half with a diamond saw, tagged and bagged to be shipped to SGS Lakefield
laboratory by road carrier for preparation. Core samples were crushed (75% <2mm) and pulverized (85% <75m). Assaying has been conducted by SGS Burnaby with the use of ICP-OES and ICP-MS after sodium peroxide fusion (GE_ICM91A50). SGS-Canada is an ISO/IEC 17025 accredited laboratory. Quality control has been monitored by an IOS certified chemist through the insersion of 7 sample blanks, 7 preparation blanks,
5 certified reference material Oreas-147, 4 certified reference material Oreas-148 and 5 certified reference material Orea-149, for a total of 28 insertions (15%).