Highlights include 49m at 3.12g/t PGM+Au, 0.33% Ni including 12m at 6.10g/t PGM+Au, 0.54% Ni, 0.8m at 1.91g/t PGM+Au, 1.65% Ni and 0.7m at 0.08g/t PGM+Au, 1.43% Ni
"The Phase 2 drill program is progressing as planned, with results extending PGM+Au+Ni mineralization from ~150m to ~400m below surface (see Figures 2 and 3) with comparable thicknesses and grades to those intercepted at shallower depths that were tested during our Phase 1 Program," said
Highlights Include:
- Geotechnical drill hole DDH23LU202 in the North Sector, located between HeliTEM anomalies T2 and T3 (not yet drill tested) intersected two zones (6.28m at 1.21g/t PGM+Au, 0.80% Ni including 3.28m at 1.45g/t PGM+Au, 1.02% Ni, and 5.20m at 0.99g/t PGM+Au, 0.84% Ni) of magmatic nickel sulphide mineralization.
- DDH23LU204 (49m at 3.12g/t PGM+Au, 0.33% Ni, including 12m at 6.10g/t PGM+Au, 0.54% Ni), shows the continuation of high-grade mineralization from DDH23LU175 on the section to the north, while directly along strike to the south is the untested HeliTEM anomaly T17.
- Magmatic Ni sulphides were also intersected in the ultramafic basal sequence at the northern end of the Central Sector in drill holes DDH23LU201 (0.77m at 1.91g/t PGM+Au, 1.65% Ni) and DDH23LU205 (0.70m at 0.08g/t PGM+Au, 1.43% Ni). These intercepts provide further indications of the potential for higher grade Ni sulphide zones in the basal units, stratigraphically below the PGM+Au+Ni mineral resource.
- Drilling testing of the 17 priority HeliTEM targets has started.
HOLE-ID | From | To | Thickness | Pd | Pt | Rh | Au | PGM + Au | Ni* (%) Sulphide | TYPE |
(m) | (m) | (g/t) | (g/t) | (g/t) | (g/t) | (g/t) | ||||
DDH23LU201 | 368.78 | 369.55 | 0.77 | 0.93 | 0.55 | 0.33 | 0.11 | 1.91 | 1.65 | FR |
DDH23LU202 | 154.40 | 160.68 | 6.28 | 1.03 | 0.16 | 0.02 | 0.01 | 1.21 | 0.80 | FR |
Including | 157.40 | 160.68 | 3.28 | 1.24 | 0.19 | 0.02 | 0.01 | 1.45 | 1.02 | FR |
And | 168.90 | 174.10 | 5.20 | 0.78 | 0.18 | 0.02 | 0.01 | 0.99 | 0.84 | FR |
DDH23LU204 | 348.58 | 397.60 | 49.02 | 2.26 | 0.68 | 0.09 | 0.09 | 3.12 | 0.33 | FR |
Including | 384.60 | 396.60 | 12.00 | 4.57 | 1.33 | 0.18 | 0.03 | 6.10 | 0.54 | FR |
DDH23LU205 | 284.80 | 285.50 | 0.70 | 0.00 | 0.00 | 0.00 | 0.07 | 0.08 | 1.43 | FR |
DDH23LU206 | 250.10 | 261.10 | 11.00 | 1.26 | 0.87 | 0.19 | 0.03 | 2.36 | 0.13 | FR |
DDH23LU215 | 387.50 | 417.50 | 30.00 | 1.15 | 0.41 | 0.06 | 0.10 | 1.73 | 0.25 | FR |
Notes: | All 'From', 'To' depths, and 'Thicknesses' are downhole. 'NA' Not applicable for Oxide material. |
Given the orientation of the hole and the mineralization, the intercepts are estimated to 120% to 130% of true thickness. | |
Type: Ox = Oxide. LS = Low Sulphur. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization. | |
* Bravo's nickel grades are sulphide nickel, and do not include non-recoverable silicate nickel, unlike historical total nickel assays. |
Luanga Drilling Update
Results from thirteen diamond drill holes have been received, which includes one of the potential pit-wall geotechnical drill holes and drilling from the Phase 2 Program. Phase 2 drilling is targeting potential extensions of PGM+Au+Ni mineralization down to twice the depth below surface that Bravo drilled in Phase 1. Two of the drill holes reported in this news release are located in the North Sector, including the geotechnical drill hole, seven are in the Central Sector, and three are in the Southwest Sector.
Geotechnical drill hole DDH23LU202 (Figure 1) located in the North Sector shows a wide (>100m) zone of magmatic Ni mineralization within which there are two distinct higher-grade Ni zones (6.28m at 1.21g/t PGM+Au, 0.80% Ni including 3.28m at 1.45g/t PGM+Au, 1.02% Ni, and 5.20m at 0.99g/t PGM+Au, 0.84% Ni), providing further evidence of magmatic nickel sulphides distributed over a significant stratigraphic thickness in the North Sector.
Also potentially significant, DDH23LU202 (Figure 4 – Section 3) intersected magmatic nickel sulphides in the gap between HeliTEM anomalies T2 and T3 (yet to be drill tested) and on strike of both EM anomalies.
Section 1 (Figure 2) in the Central Sector shows DDH23LU204 (49m at 3.12g/t PGM+Au, 0.33% Ni , including 12m at 6.10g/t PGM+Au, 0.54% Ni), which lies directly along strike from previously reported drill hole DDH23LU175 in Figure 3 (54m at 2.33g/t PGM+Au, 0.22% Ni , including 32m at 4.99g/t PGM+Au, 0.30% Ni).
The results from DDH23LU204 define a continuation of a distinct higher-grade zone of mineralization extending from DDH23LU175 on the section to the north and close to the geographic centre of the Luanga intrusion. Assay results from DDH23LU204 show increased PGM+Au and significantly higher Ni sulphide grades as compared to DDH23LU175 to the north. Directly to the south of DDH23LU204 is HeliTEM anomaly T17, which is scheduled to be drilled in the coming months.
Section 2 (Figure 3) shows DDH23LU215 (30m at 1.73g/t PGM+Au, 0.25% Ni), drilled below (down dip) of drill hole DDH23LU175, which demonstrates that mineralization continues at depth, albeit with a lesser thickness in comparison to DDH23LU175. This result, coupled with the significant increase in grade in DDH23LU204 to the south (see Figure 5 for location), could be indicative of a plunging high-grade zone.
At the northern end of the Central Sector, magmatic Ni sulphides were also intersected in the ultramafic footwall in drill holes DDH23LU201 (0.77m at 1.91g/t PGM+Au, 1.65% Ni) and DDH23LU205 (0.70m at 0.08g/t PGM+Au, 1.43% Ni) supporting the potential for zones of magmatic Ni sulphides in the stratigraphic basal units of the Central Sector.
Drill Results Status Update
A total of 238 drill holes (103 in 2023) have been completed by Bravo to date, for 51,217.75 metres, including 8 metallurgical holes (not subject to routine assaying).
Results have been reported for 213 Bravo drill holes to date. Assay Results for 17 Bravo drill holes that have been completed are currently outstanding (excluding the metallurgical holes).
Section 3 below (Figure 4) in the
Complete Table of Recent Intercepts.
HOLE-ID | From | To | Thickness | Pd | Pt | Rh | Au | PGM + Au | Ni* (%) Sulphide | TYPE |
(m) | (m) | (g/t) | (g/t) | (g/t) | (g/t) | (g/t) | ||||
DDH23LU199 | 154.70 | 189.70 | 35.00 | 0.68 | 0.25 | 0.02 | 0.02 | 0.97 | 0.12 | FR |
Including | 170.70 | 180.70 | 10.00 | 1.05 | 0.31 | 0.03 | 0.03 | 1.41 | 0.21 | FR |
DDH23LU201 | 368.78 | 369.55 | 0.77 | 0.93 | 0.55 | 0.33 | 0.11 | 1.91 | 1.65 | FR |
And | 384.37 | 386.40 | 2.03 | 3.02 | 1.72 | 0.19 | 0.02 | 4.96 | 0.07 | FR |
DDH23LU202 | 68.50 | 183.10 | 114.60 | 0.22 | 0.08 | 0.01 | 0.01 | 0.32 | 0.20 | FR |
Including | 154.40 | 160.68 | 6.28 | 1.03 | 0.16 | 0.02 | 0.01 | 1.21 | 0.80 | FR |
Also Including | 157.40 | 160.68 | 3.28 | 1.24 | 0.19 | 0.02 | 0.01 | 1.45 | 1.02 | FR |
Including | 168.90 | 174.10 | 5.20 | 0.78 | 0.18 | 0.02 | 0.01 | 0.99 | 0.84 | FR |
Including | 174.10 | 183.10 | 9.00 | 0.24 | 0.08 | 0.01 | 0.00 | 0.33 | 0.20 | FR |
And | 197.00 | 202.00 | 5.00 | 0.52 | 0.16 | 0.01 | 0.00 | 0.69 | 0.37 | FR |
DDH23LU203 | 252.80 | 269.86 | 17.06 | 0.33 | 0.19 | 0.01 | 0.01 | 0.54 | 0.13 | FR |
And | 351.50 | 368.50 | 17.00 | 0.88 | 0.41 | 0.05 | 0.03 | 1.37 | 0.16 | FR |
DDH23LU204 | 348.58 | 397.60 | 49.02 | 2.26 | 0.68 | 0.09 | 0.09 | 3.12 | 0.33 | FR |
Including | 384.60 | 396.60 | 12.00 | 4.57 | 1.33 | 0.18 | 0.03 | 6.10 | 0.54 | FR |
And | 414.60 | 463.60 | 49.00 | 0.31 | 0.22 | 0.01 | 0.01 | 0.55 | 0.01 | FR |
DDH23LU205 | 284.80 | 285.50 | 0.70 | 0.00 | 0.00 | 0.00 | 0.07 | 0.08 | 1.43 | FR |
And | 327.20 | 336.10 | 8.90 | 0.61 | 0.36 | 0.03 | 0.02 | 1.03 | 0.10 | FR |
And | 382.10 | 402.10 | 20.00 | 0.47 | 0.17 | 0.01 | 0.03 | 0.68 | 0.15 | FR |
DDH23LU206 | 223.12 | 233.10 | 9.98 | 0.66 | 0.39 | 0.09 | 0.00 | 1.15 | 0.19 | FR |
And | 250.10 | 261.10 | 11.00 | 1.26 | 0.87 | 0.19 | 0.03 | 2.36 | 0.13 | FR |
DDH23LU207 | 45.70 | 47.74 | 2.04 | 1.56 | 1.06 | 0.21 | 0.05 | 2.88 | 0.03 | FR |
DDH23LU208 | 268.50 | 276.50 | 8.00 | 0.32 | 0.11 | 0.02 | 0.00 | 0.46 | 0.16 | FR |
DDH23LU209 | 171.20 | 178.40 | 7.20 | 0.34 | 1.34 | 0.08 | 0.01 | 1.76 | 0.01 | FR |
And | 195.40 | 199.40 | 4.00 | 0.78 | 0.57 | 0.16 | 0.01 | 1.51 | 0.02 | FR |
And | 207.40 | 215.40 | 8.00 | 1.14 | 0.97 | 0.19 | 0.02 | 2.31 | 0.01 | FR |
DDH23LU210 | No significant results | |||||||||
DDH23LU212 | No significant results | |||||||||
DDH23LU215 | 238.50 | 244.50 | 6.00 | 0.30 | 0.11 | 0.00 | 0.04 | 0.46 | 0.05 | FR |
And | 268.50 | 275.50 | 7.00 | 0.38 | 0.15 | 0.05 | 0.03 | 0.62 | 0.11 | FR |
And | 372.60 | 375.00 | 2.40 | 1.50 | 0.52 | 0.14 | 0.14 | 2.30 | 0.31 | FR |
And | 387.50 | 417.50 | 30.00 | 1.15 | 0.41 | 0.06 | 0.10 | 1.73 | 0.25 | FR |
And | 450.50 | 494.50 | 44.00 | 0.27 | 0.26 | 0.01 | 0.01 | 0.54 | 0.02 | FR |
Notes: | All 'From', 'To' depths, and 'Thicknesses' are downhole. 'NA' Not applicable for Oxide material. |
Given the orientation of the hole and the mineralization, the intercepts are estimated to 120% to 130% of true thickness. | |
Type: Ox = Oxide. LS = Low Sulphur. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization. | |
* Bravo's nickel grades are sulphide nickel, and do not include non-recoverable silicate nickel, unlike historical total nickel assays |
About
Bravo is a Canadian and
Technical Disclosure
Technical information in this news release has been reviewed and approved by
Forward Looking Statements
This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as "further indications", "further evidence", "significant", "indicative", "continue", "potential", variants of these words and other similar words, phrases, or statements that certain events or conditions "may" or "will" occur. This news release contains forward-looking information pertaining to the Company's ongoing drill program and the results thereof including the potential for additional massive Ni sulphides; comparisons to historical and prior Bravo drilling; the results of airborne geophysical surveys and whether any preliminary or future interpretations of anomalies are related to mineralization; the potential for extensions to mineralization at depth; and the Company's plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, unexpected results from exploration programs, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm that the interpreted mineralization contains significant values of nickel, PGMs and Au; that the mineralization remains open to depth, that Ni grades are improving to depth; that a zone of higher grade mineralization may be present in the Central Sector; that the presence of magmatic Ni sulphides may be indicative of zones of potential economic interest; that the geophysical anomalies identified are related to mineralization of potential economic interest; that final drill and assay results will be in line with management's expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the
Schedule 1: Drill Hole Collar Details
HOLE-ID | Company | East (m) | North (m) | RL (m) | Datum | Depth (m) | Azimuth | Dip | Sector |
DDH23LU199 | Bravo | 656599.99 | 9339303.69 | 241.276 | SIRGAS2000_UTM_22S | 200.90 | 360.00 | -60.00 | Southwest |
DDH23LU201 | Bravo | 658919.43 | 9340687.65 | 275.167 | SIRGAS2000_UTM_22S | 470.40 | 330.00 | -60.00 | Central |
DDH23LU202 | Bravo | 659815.13 | 9342616.05 | 279.231 | SIRGAS2000_UTM_22S | 300.15 | 90.00 | -60.00 | North |
DDH23LU203 | Bravo | 659769.37 | 9341222.67 | 184.542 | SIRGAS2000_UTM_22S | 420.10 | 330.00 | -60.00 | Central |
DDH23LU204 | Bravo | 658460.79 | 9340294.29 | 260.005 | SIRGAS2000_UTM_22S | 470.30 | 330.00 | -60.00 | Central |
DDH23LU205 | Bravo | 659300.50 | 9340836.81 | 224.204 | SIRGAS2000_UTM_22S | 500.20 | 330.00 | -60.00 | Central |
DDH23LU206 | Bravo | 659753.92 | 9341351.38 | 192.770 | SIRGAS2000_UTM_22S | 350.25 | 330.00 | -60.00 | Central |
DDH23LU207 | Bravo | 657850.00 | 9339954.98 | 232.655 | SIRGAS2000_UTM_22S | 200.05 | 360.00 | -60.00 | Southwest |
DDH23LU208 | Bravo | 659896.21 | 9341404.34 | 203.992 | SIRGAS2000_UTM_22S | 375.90 | 330.00 | -60.00 | Central |
DDH23LU209 | Bravo | 659247.39 | 9343074.99 | 219.991 | SIRGAS2000_UTM_22S | 250.60 | 90.00 | -60.00 | North |
DDH23LU210 | Bravo | 657101.05 | 9339483.50 | 247.115 | SIRGAS2000_UTM_22S | 306.10 | 360.00 | -60.00 | Southwest |
DDH23LU212 | Bravo | 657300.00 | 9339562.00 | 221.627 | SIRGAS2000_UTM_22S | 320.10 | 360.00 | -60.00 | Southwest |
DDH23LU215 | Bravo | 658543.15 | 9340351.39 | 269.056 | SIRGAS2000_UTM_22S | 520.30 | 330.00 | -60.00 | Central |
Schedule 2: Assay Methodologies and QAQC
Samples follow a chain of custody between collection, processing, and delivery to the SGS laboratory in Parauapebas, state of Pará,
Quality Assurance and Quality Control ("QAQC") is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.
Bravo SGS Geosol | ||||
Preparation | Method | Method | Method | Method |
For All Elements | Pt, Pd, Au | Rh | Sulphide Ni, Cu | Trace Elements |
PRPCLI (85% at 200#) | FAI515 | FAI30V | AA04B | ICP40B |
SOURCE
© Canada Newswire, source