Currie Rose Resources Inc. provided an update on its North Queensland Vanadium Project (‘NQVP') situated within the ‘Vanadium Hub' approximately 450 km west of the port of Townsville, Queensland, Australia. Air Core (AC) drill samples collected from the Cambridge deposit by Liontown Resources in 20191 were relocated to Currie's storage facility for review and preparation for metallurgical testwork. A total of 51 samples from seven drill holes located throughout the Cambridge deposit that represented the mineralised zone will undergo a series of tests to provide precursor information for the upcoming diamond drill hole All the above drill samples have been previously assayed and were dispatched to ALS Metallurgy in Balcatta, Western Australia who have generated a representative composite sample totalling ~150kg (3kg/sample).

The testwork will cover: Ore characteristics Mineralogy Beneficiation work - including gravity and sighter floatation tests The results are expected to be delivered in stages with completion designed to assist the definitive testwork that will result from the large diameter diamond drill program. Planning is well underway to drill a series of large diameter core drill holes (PQ or HQ) throughout the Cambridge deposit. The drilling will focus on delivering sufficient sample to enable an expansive metallurgical testwork program with the aim of producing a flow sheet appropriate for a Preliminary Economic Assessment.

In addition to the metallurgical studies, drill holes will be: Geotechnically logged for pit design Downhole gamma logged for stratigraphy Assayed for inclusion in an up-dated resource estimate Monitored for water information.