Koncar distributivni i specijalni transformatori d d : THE “KONČAR” ANNUAL AWARD FOR THE DOCTORAL THESIS AWARDED TO MARIO JURKOVIĆ, PHD
December 23, 2021 at 09:17 am
Share
THE "KONČAR" ANNUAL AWARD FOR THE DOCTORAL THESIS AWARDED TO MARIO JURKOVIĆ, PHD
THE "KONČAR" ANNUAL AWARD FOR THE DOCTORAL THESIS AWARDED TO MARIO JURKOVIĆ, PHD
It is an honour to commend another great success for our company, which is primarily a success of our colleague but it also significantly contributes to the wider transformer community and industry.
We would like to take this opportunity to congratulate our colleague Mario Jurković, PhD, on his doctoral thesis, defended in the academic year 2020/2021, and on his outstanding scientific achievements in the field of industry-applied technical sciences. The award is sponsored by the company Končar - Elektroindustrija d.d. and it was awarded to our colleague Jurković as part of the celebration of the Faculty Day of the Faculty of Electrical Engineering and Computing, University of Zagreb. The award was presented by Ivan Bahun, PhD, Deputy Chairman of the Management Board of the company Končar - Elektroindustrija d.d.
The title of the thesis is "Calculation of transformer short-circuit voltage using conformal mappings" (in Croatian: Izračun napona kratkoga spoja transformatora primjenom konformnih preslikavanja).
The mentor of this doctoral thesis was Professor Damir Žarko, PhD, who has recently, in co-authorship with Branimir Ćućić, PhD, published the first book about transformers in Croatian since the book written by Anton Dolenc in 1961.
During his many years of work as a special transformer design engineer , our colleague Jurković realised that the special in-house computer programs based on analytical solutions provide satisfactory solutions for common transformer geometries, but for more complicated geometries the design engineer has to use the experience and comparison with measurements of similar transformers. The solution to the problem could be in the use of computer programs based on the finite element method (FEM), but the primary goal was to come up with a method that would be easy to use and easy to implement into existing computer programs.
In accordance with the aforementioned, the method presented in the doctoral thesis is an adequate alternative to the finite element method (FEM).
In addition to being a commendable example of great personal commitment and investment into one's work, this is a great example of how successful, applicable and improved industrial solutions can emerge from the synergy of the scientific community and practical experience gained through the economy.
Dolores Berhanu2021-12-22T11:35:04+00:0022. December 2021.|
Related Posts
SCHOLARSHIPS FOR OUTSTANDING STUDENTS OF THE FACULTY OF ELECTRICAL ENGINEERING AND COMPUTING AND THE FACULTY OF MECHANICAL ENGINEERING AND NAVAL ARCHITECTURE IN THE ACADEMIC YEAR 2021/2022
22. December 2021.|0 Comments
THE 15TH SESSION OF THE INTERNATIONAL COUNCIL ON LARGE ELECTRIC SYSTEMS - HRO CIGRÉ
23. November 2021.|0 Comments
CLEANING OF THE JANKOMIR FOREST AT THE SAVA EMBANKMENT - KONČAR - DISTRIBUTION AND SPECIAL TRANSFORMERS & LIL CLEANING BEARS (IN CROATIAN: ČISTEĆI MEDVJEDIĆI)
15. November 2021.|0 Comments
REPORT ON CORPORATE SOCIAL RESPONSIBILITY AND SUSTAINABILITY 2020
10. November 2021.|0 Comments
Končar - Distribution and Special Transformers winner of the "Golden Marten" plaque of the Croatian Chamber of Commerce - the Zagreb Chamber
20. October 2021.|0 Comments
Attachments
Original Link
Original Document
Permalink
Disclaimer
Koncar - distributivni i specijalni transformatori dd published this content on 22 December 2021 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 23 December 2021 14:16:08 UTC.
Koncar Distributivni i Specijalni Transformatori dd is a Croatia-based company active in the electrical sector. It produces and distributes medium power and special transformers up to 100 megavolt ampere (MVA) and 170 kilovolt (kV). The Company's product range includes oil immersed distribution transformers, dry type distribution transformers, medium power transformers and special transformers, such as rectifier and converter transformers, locomotive transformers, transformers for ironworks, earthing transformers, reactors, traction transformers for fixed installations and rolling stocks, furnace transformers, autotransformers and reactors for different applications, among others. The Company sells its products domestically and abroad: in European countries, such as Sweden, Germany, France, United Kingdom, Poland, Russia, Estonia, Spain, Albania, Slovenia, among others, Gulf Countries, Near East, Africa and America.