Dampier Gold Limited (ASX: DAU)
INVESTOR PRESENTATION
JANUARY 2020
Transformational gold explorer and emerging producer
Significant project holding in a World Class Gold region of
~20Moz production
1
Disclaimer
This document has been prepared by Dampier Gold Ltd ACN 141 703 399 (ASX:DAU) (Dampier or the Company). No party other than Dampier has authorised or caused the issue of this document, or takes responsibility for, or makes any statements, representations or undertakings in this document.
Presentation of general background: This document contains general background information about Dampier's proposed activities current as at the date of this presentation (Information). It is Information in a summary form only and does not contain all the information necessary to fully evaluate any investment. Further Information on Dampier can be obtained from its website at www.dampiergold.com.
Not investment advice: The Information provided in this presentation is not intended to be relied upon as advice to investors or potential investors and has been prepared without taking into account the recipient's investment objectives, financial circumstances or particular needs. Any investment decision should be made based solely upon appropriate due diligence and, if applicable, upon receipt and careful review of relevant offering documents. Recipients of this presentation are advised to consult their own professional advisers.
Future performance: This presentation contains certain forward-looking statements. The words 'anticipate', 'believe', 'expect', 'project', 'forecast', 'estimate', 'likely', 'intend', 'should', 'could', 'may', 'target', 'plan' and other similar expressions are intended to identify forward-looking statements. Indications of, and guidance on, future earnings and financial position and performance are also forward-looking statements. Such forward-looking statements are not guarantees of future performance and involve known and unknown risks, uncertainties and other factors, many of which are beyond the control of Dampier, and its officers, employees, agents and associates, that may cause actual results to differ materially from those expressed or implied in such statements. Actual results, performance or outcomes may differ materially from any projections and forward-looking statements and the assumptions on which those assumptions are based. You should not place undue reliance on forward-looking statements and neither Dampier nor any of its directors, employees, servants, advisers or agents assume any obligation to update such Information.
2
Competent Persons Statement
Competent Persons Statement - Terra Search Pty Ltd
The information in this report that relates to exploration results has been compiled by Mr David Jenkins, a full time employee of Terra Search Pty Ltd, geological consultants employed by Dampier Gold Ltd. Mr Jenkins is a Member of the Australian Institute of Geoscientists and has sufficient experience in the style of mineralisation and type of deposit under consideration and the activity which they are undertaking to qualify as Competent Persons as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results ("JORC Code"). Mr Jenkins consents to the inclusion in the report of the matters based on the information in the form and context in which it appears.
Competent Persons Statement
Mr Malcolm Carson has reviewed and presented information in this report from information and exploration results compiled by consultants to the Company and presented to Dampier Gold Limited. Malcolm Carson has sufficient experience that is relevant to the style of mineralisation, the types of deposits under consideration and to the activity that he is undertaking and qualifies as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results ("JORC Code"). Mr Carson is a Member of the Australian Institute of Mining and Metallurgy (AusIMM) and Australian Institute of Geoscientists (AIG) and is a Director of Dampier Gold Limited and Allegiance Coal Limited. Mr Carson consents to the inclusion in the report the matters based on the information in which it appears.
DATA SOURCE / REFERENCES:
Summary of results from the data reviewed and analysed by Dampier and its independent consultants during its due diligence were released to the market on 19th December 2019 under the heading: DUE DILIGENCE UPDATE CREDO AND ZULEIKA PROJECTS which includes results which are repeated in slides in this presentation.
3
EXECUTIVE SUMMARY
Aim to be a gold producer within 3 years
Advanced highly prospective projects:
- Marymia/K2 Gold Project:
- K2 Gold Project (4.1% owned, with JV to earn up to 50%).*
- Milestone Payments due to Dampier - $4M**.
- Royalty Payments due to Dampier - $2M**.
- Zuleika JV Gold Project (JV to earn 75%) ***
- Credo JV Gold Project (JV to earn 50%) ***
- Menzies Gold Project (80%)
- Goongarrie Gold Project (80%)
- Ruby Plains Gold Project (100%)
*Reference: DAU ASX Announcement Significant upgrade to K2 DFS 8 October 2014 | |
** Reference: DAU ASX Announcement Sale of Plutonic Dome Gold Project 25 August 2016 | 4 |
*** Reference: DAU ASX Announcement Shareholder Approval for Joint Venture 19 December 2019 |
Capital Structure
Dampier's enterprise value of A$4 million represents a significant discount to the value of its assets.
Details as at 27 Nov 2019 | Value |
Debt | Nil |
Ordinary Shares on issue | 190,485,995 |
Share Price | $0.022 |
Market Capitalisation | $4.2M |
Cash at Bank | $1.4M |
Options on Issue | 6,000,000 |
Major Shareholders | No. Shares | % |
Directors | 6M | 3.2% |
Top 20 shareholders total | 152M | 79.97% |
Board of Directors | Name | Experience | |
Executive Chairman | Malcolm Carson | • | BSc. (Geology), MSc.(Resource |
Management),Member | |||
AUSIMM., Member AIG | |||
• | Experienced Geologist with | ||
more than 40 years of mining | |||
experience | |||
• | Focused on exploration and | ||
development of gold projects | |||
Executive Director | Annie H Guo | • | B.Econ., M.Fin |
• | More than 18 years of capital | ||
market, M&A in mining | |||
experience. Focused on gold. | |||
Non Executive | Peiqi Zhang | • | Member of the World Academy |
Director | of Productivity Science and has | ||
more than 40 years' experience | |||
in the mining industry. Focused | |||
on gold. | |||
Advisory Team | ||
Gavin Solomon/PrimaryMarkets | Corporate Advisor | |
Paul Underwood | Strategic planning and corporate development advisor | |
Terra Search Consultants | Exploration and development technical advisor | |
King & Wood Mallesons | Litigation Legal Advisors - current | |
Steinepreis Paganin | Corporate Legal Advisor | |
Michael Higginson | Company Secretary | 5 |
Marymia Gold Project
including
K2 Gold Project
6
Marymia Gold Project
Dampier has rights both Milestone Payments and Royalty Payments
On 16th August 2016 Dampier and Vango Mining Limited (ASX: VAN) (Vango) entered into an Agreement for Sale and Purchase of all of the shares in Dampier (Plutonic) Pty Limited (DPPL) then being a wholly owned subsidiary of Dampier (DPPL Agreement) as well as a Royalty Deed (DPPL Royalty Deed):*
- Both the DPPL Agreement and DPPL Royalty Agreement related to a number of mining tenements (including the K2 Project Tenement) then owned 60% by Vango and 40% by DPPL (DPPL Tenements).
- As part of the consideration payable by Vango to Dampier as specified in both the DPPL Agreement and the DPPL Royalty Deed, Dampier is entitled to be paid by Vango up to a further A$6M from the successful development of any of the DPPL Tenements (including but not limited to the K2 Project) in both milestone payments (Milestone Payments *) and royalty payments (Royalty Payments *), namely:
- The Milestone Payments are as follows:
- The Royalty Payments (capped at A$2M), payable quarterly, are as follows:
Gold Price Threshold London spot fix AM (USD/oz) | Royalty payable as % of the value of gold produced |
US$1,175 - US$1,250 | 1% |
US$1,250 - US$1,400 | 2% |
US$1,400 - US$1,500 | 3% |
US$1,500+ | 4% |
* Reference: DAU ASX Announcement Sale of Plutonic Dome Gold Project 25 August 2016 | 7 |
K2 Gold Project - Joint Venture
Binding Joint Venture
Separate and apart from the Milestone Payments and Royalty Payments, Dampier, Vango and DPPL entered into a binding Joint Venture in relation to the K2 Gold Project (part of Marymia Gold Project) dated 12th May 2017:
- Dampier has the right to earn up to a 50% beneficial and legal interest in the K2 Project by expending the lesser of 50% of Capex (a defined term) for the K2 Project or A$3M in project expenditure (Earn-InRights). *
- Vango has acknowledged and agreed that Dampier had already expended A$245,239.78 in valid project expenditure and that such expenditure formed part of Dampier's Earn-In Rights representing a minimum of a 4.1% interest in the K2 Project (4.1% Interest). **
- On 9th August 2018 Dampier issued a Notice of Dispute to Vango in relation to the Joint Venture, which dispute has yet to be resolved.
- On 18th September 2018 Vango announced an unsolicited scrip-for-scrip takeover offer of Dampier (Takeover Offer).
- Dampier received on 1st November 2018 an Independent Expert's Report from Stantons International Securities which Dampier released to the ASX on 5th November 2018 in the Target's Fourth Supplementary Statement which stated, inter alia, that the Takeover Offer was "not fair and not reasonable" for Dampier shareholders.
- The Takeover Offer closed on 4th January 2019 and was not successful.
- Vango currently owns 37,738,568 shares in Dampier representing 19.81%.
* Reference: DAU ASX Announcement K2 Mine Development 16 May 2017 | |
** Reference: DAU ASX Announcement Sale of Plutonic Dome Gold Project 25 August 2016 | 8 |
K2 Gold Project - Resources
Dampier pursuing its rights to increase from 4.1% to up to 50% equity in the K2 Project
- K2 Project is part of Plutonic Dome Gold Project and is located 50km north of Sandfire's Degrussa copper gold mine and 35km north east of the Plutonic Mine and Processing plant.
- Current K2 JORC 2012 Resources: *
- Indicated 0.20Mt @ 8.9 g/t Au (57Koz)
- Inferred 0.22Mt @ 6.7 g/t Au (47Koz)
- Total Resources of 0.42Mt @ 7.7g/t Au (103Koz)
K1 pit - to bedewatered historic photo
- Existing 1.4km decline developed by Resolute Mining Limited in 1997 to the ore blocks.
- Resolute completed an underground development Feasibility study in 1996 and excavated a boxcut for the decline portal. The mine was prematurely closed in 1998 due to historically weak gold
prices, after only minor amounts of ore extraction. | K2 / Plutonic |
* Reference: DAU ASX Announcement 8 October 2014 | K2 DeclineBox Cut and Portal | |
historic photo | 9 |
K2 Gold Project - Existing Infrastructure
Plutonic Dome Tenements, Geology, K2 location and Processing Facilities
Billlabong Gold Pty Ltd
Plutonic Processing Plant
K2 Deposit
K2 Deposit and Existing H1.4 kilometer Decline
Existing Infrastructure includes:
- 1.4km decline to ore blocks
- 35km to Billabong's Processing Plant
- Existing haul roads to Plant
- Fully equipped mining camp, fleet and personnel at Billabong's Plutonic Mine
NOTE: There is a current legal dispute between Billabong Gold Pty Ltd, a wholly owned subsidiary of Superior
Gold Inc (TSX-V: SGI) and Vango in relation to the Plutonic Gold Project including the K2 Project.*
* Reference: DAU ASX Announcement, 9 November 2018 and Fourth Supplementary Target Statement, 5 November 2018 | 10 |
Plutonic Dome Gold Area - Naming of Projects
Clarification of terminology used by Dampier and Vango
Naming of Projects:
For clarity, each of Dampier, and Vango use different project names in their respective reporting and ASX announcements and in summary:
- By Dampier:
- The Plutonic Dome Gold Project means the same ground/tenements as the DPPL Tenements.
- The Milestone Payments and Royalty payments relate to the DPPL Tenements.
- The K2 Gold Project relates to part of the DPPL Tenements.
- The Marymia Gold Project relates to part of the DPPL tenements a. By Vango:
- Project names include Marymia, Trident, Marwest, Mareast, Mars, Pelican, Wedgetail, Trident, Vulcan, Triple-P and Albatross Flamingo-Exocet and all relate in part or whole to the Plutonic Dome Gold Project/DPPL Tenements.
- The K2 Gold Project relates to part of Vango's Projects.
11
Kalgoorlie Tenements Locations
12
Kalgoorlie Tenement locations
Company making potential - flagship projects
- Zuleika JV -50kmNWof Kalgoorlie,WA (JV for upto75%
- Credo JV - 35km N of Kalgoorlie, WA (JV for up to 50%)
- Menzies - 120km N of Kalgoorlie, WA (80% owned)
- Goongarrie - 90km NE of Kalgoorlie, WA (80% owned)
13
Zuleika & Credo
14
"With more than 20million
ounces of historical
production, the Zuleika Shear is one of the most sought after gold regions in Australia.
The largely ignored parallel
Carnage Shear displays
many of the same
characteristics"
Malcolm Carson, Dampier Gold Executive
Chairman
1
15
5
Zuleika and Credo Joint Ventures
Term Sheets key points
Zuleika Gold Project JV:*
Dampier has farm-in rights to earn up to 75% interest in the Zuleika tenements held by Torian Resources Ltd (Torian) over 4 years as follows:
- Earn initial interest of 30% by spending $1M on the project (year 1), then additional 15% interest each year by spending a further $1M per year on the project to earn up to 75% (year 4).
- On completion the farm-in will convert to an unincorporated JV.
- Dampier to grant a convertible note debt instrument of A$500,000 to Torian at $0.01/share conversion rate.
- Dampier to issue 10,000,000 2 year options to Torian at exercise price if $0.15 per option.
Credo Well Gold Project JV:*
- Dampier has farm-in rights to earn up to 50% interest in the Credo tenements held by Torian over 4 years as follows: Earn initial interest of 25% by spending $0.5M on the project (year 1), then additional total 25% interest by spending a further $0.5M on the project each following year to earn up to 50% (year 4).
- On completion the farm-in will convert to a unincorporated JV.
- Dampier will have a casting vote in the JV when it holds interest of 50% or more.
* Reference: DAU ASX Announcement 4 October 2019 and shareholder approval announced 19 December 2019
16
Zuleika JV Gold Project - Overview (JV to earn up to 75%)
Flagship Project Overview
-
2 Mining Leases, 1 Exploration Licence and
108 Prospecting Licences with total land area ~222km².* - Project covers ~50km of highly prospective Black Flag sequence, Zuleika and Carnage Shears.*
- Nearby major gold producers include:
- Evolution Mining - 2nd largest gold producer on the ASX
- Northern Star - 3rd Largest gold producer on the ASX
- Zijin Mining - China's largest gold producer
- Tribune and Rand - JV with Northern Star
* Reference: DAU ASX Announcement 4 October 2019 and 19 December 2019
17
Credo Well JV Gold Project - Overview (JV to earn up to 50%)
Located in multi-million ounces Mt Pleasant district
- 15 Prospecting Licenses, 14 of which are consolidated into 1 Mining Lease Application with total area of ~17km².
- Prospective gold targets including Credo Well, Fortis and Fidelitas
- Potential for both supergene and primary gold mineralisation
- High grade intersections include:
- 3m @ 16.46g/t Au from 54m
- 1m @ 58.80g/t Au from 1m
- 4m @ 32.51g/t Au from 27m
- 2m @ 57.05g/t Au from 29m
- 1m @ 68.50g/t Au from 39m
Reference: Appendix A Drilling Results, Appendix B JORC
Table WAMEX Reports, DAU ASX Announcement 19
December 2019
18
Exploration Development Priorities
Drill ready targets - targeted mineralized zones
Priority 1 | Credo | |
Paradigm East | ||
Browns Dam | ||
RCRig Drilling at Dampier's ZuleikaJVProject | (define resource in year 1) | |
historical photo | ||
Zuleika Central | ||
Priority 2 | Carnage Shear |
(drill test with deeper drilling 800 ha area of anomalous bedrock gold and 12km strike)
RAB Drilling at Dampier's Zuleika JVProject
Historical photo
Priority 3 | Castle Hill East - drill test extensive bedrock |
anomaly with >500m strike | |
Regional - geochemical sampling and geophysics | |
for second stage target generation |
19
Next steps: Accelerated Drilling Program
Continuous exploration news flow anticipated
Drill program targeting a minimum of 65,000m over 12 - 48 months
Paradigm East | 4,000m RC, drill test identified mineralisation open to the north, south and south |
west. Scope to define a resource in year 1 | |
Credo | 4,000m RC, drill test supergene and primary gold mineralisation open at depth |
and along strike. Scope to define a resource in year 1. | |
Browns Dam | 4,000m RC, drill test identified untested bedrock anomaly associated with typical |
gold bearing Komatiites over a >2km strike. | |
Zuleika Central /Carnage 25,000m AC, drill test with deeper drilling 800ha area of anomalous bedrock gold
Shear | and 12km strike adjacent to the Carnage Shear. |
Castle East | 4,000m RC, drill test extensive bedrock anomaly with >500m strike |
Regional | Geochemical sampling with auger drilling, and geophysics for second stage target |
generation | |
Total budget $6M over 4 years including year 1 $1.5M (subject to funding).
20
Menzies & Goongarrie Projects
21
Menzies Gold Project - Overview (80% owned)
Overview
- The Menzies Gold Camp has produced >500,000 oz gold (gold stars)
- Historic underground mines show the mineralization was very high grade
- The "untested" eastern border of the Menzies tenement covers the greenstone contact and lies adjacent to the Menzies Goldfield
- Regional magnetics suggest the presence of mafics and ultramafics
22
Goongarrie Gold Project - Overview (80% owned)
Overview
- Goongarrie Tenements overlie unexplored Greenstone lithologies
- Significant untested structure beneath sand and lake sediments
- Dampier field work confirmed the presence of ultra-mafic/mafic and felsic rocks and anomalous gold and nickel results .
Menzies
Goongarrie
23
Ruby Plains Gold Project
24
Ruby Plains Gold Project - 100% owned
The Tenements and the Target Areas
The strategic ground position covers an area with the potential to contain Plutonic gold deposits within ancient palaeo-river channels. The proposed source of gold is from the physical and chemical weathering of the auriferous Halls Creek Group during the late Cretaceous-early Tertiary period.
Erosion
TARGETS | Granted Tenements and |
Gold Trapped in Alluvial, Placer | Applications for |
(Sand & Gravel) Channels | 821sqkm tenements |
25
- Motivated team in place that is delivering on strategic targets.
- Upside in Resource growth.
- Protection of current position in Plutonic Dome Gold Project plus potential upside from enhancement of interests in K2 Gold Project.
Summary
- Aggressive drilling campaign on world class shear zones
- Zuleika, Carnage and Credo - large landholding in the ~20m ounce Goldfield with 34 drill- ready targets
- Goongarrie and Menzies - grassroots exploration on untested greenstones with first results showing presence of gold and nickel
26
Technical Information
27
Zuleika JV Gold Project - Zuleika Shear and Carnage Shear
Two world class shear zones
Zuleika Shear
- 50km contiguous acreage of world class gold strike in the Kalgoorlie region.
- Major crustal conduit for gold fluids.
- High grade open pit and underground potential.
- Dampier's tenements underexplored along strike and at depth.
Carnage Shear
- 20km contiguous strike in tenements
- Largely underexplored, splay off Zuleika and mirror image of the Zuleika.
Both
- Dampier has identified 8 drill-ready targets which have scope to deliver early resources from first year's exploration budget ($0.5M)
Reference: Appendix A Drilling Results, Appendix B JORC Table WAMEX Reports, DAU ASX Announcement 19 December 2019 | 28 |
Zuleika JV Gold Project - Kurrawang
Identical mineralisation identified on each side of Kurrawang Epiclastic Basin
- Mineralisation found in Kurrawang Formation
- Gabbros and Black Flag formation east of Carnage shear host gold mineralisation
- Mirror image of Bullant mineralisation identified on Carnage Shear side of Kurrawang basin.
- Bullant production to date >500koz
Kurrawang
Epiclastic Basin
Zuleika
Shear
Carnage
Shear
Ref: Appendix A Drilling Results, Appendix B JORC Table WAMEX Reports, DAU ASX Announcement 19 December 2019
29
Zuleika JV Gold Project - Immediate drill targets
34 drill-ready gold targets
34 targets are defined based on anomalous historical drilling results:
- Zuleika North - 8 targets
- Zuleika Central - 12 targets
- Zuleika South - 6 targets
- Credo - 8 targets
Zuleika North | Credo | |
8 targets | 8 targets |
Zuleika Central 12 targets
Zuleika South
6 targets
30
Zuleika JV Gold Project - Zuleika North
Zuleika North - priority targets from drilling and assay data
- Browns Dam - grade intersections including 12m @ 2.5 g/t incl. 4m @ 3.9 g/t
- Paradigm East - grade intersections including 7m @ 9.8 g/t incl. 2m @ 30.9 g/t
- Paradigm South shows mineralisation over 1km, including 4m @ 5.3 g/t
Ref: Appendix A Drilling Results, Appendix B JORC Table, DAU ASX Announcement 19 December 2019 | 31 |
Zuleika JV Gold Project - Browns Dam
Zuleika North - close up view of geology and magnetics - Browns Dam
• Komatiite is the typical gold host
• Gold mineralization in Komatiite identified at Browns Dam from historical drilling
• Target shows Komatiite zone extends for 2km
2km Komatiite strike geology map
2km Komatiite strike magnetics map
Ref: Appendix A Drilling Results, Appendix B JORC Table, DAU ASX Announcement 19 December 2019 | 32 |
Zuleika JV Gold Project - Black Flag Formation
Zuleika Central - Extensive zone of Black Flag formation proximal to Carnage Shear
Target: Anomalous gold in bedrock drilling proximal to the Carnage shear, in traverses over area of 4km x 2km (800ha). Target area is part of 12km strike of anomalous bedrock mineralisation adjacent to the shear
Target : Anomalous gold results identified in Castle Hill East >500m strike (Castle Hill Mine - 3.8Moz)
Reference: Appendix A Drilling Results, Appendix B JORC Table, , DAU ASX Announcement 19 December 2019 | 33 |
Zuleika JV Gold Project - Zuleika South
Zuleika South - intersection of Black Flag Fault and the Carnage Shear provide exciting targets
Target : Anomalous gold results identified in Zuleika south near Carnage shear
Reference: Appendix A Drilling Results, Appendix B JORC Table, , DAU ASX Announcement 19 December 2019 34
Credo Well JV Gold Project - Immediate Drill Targets
Drill ready targets - mineralized zones
Dampier has identified from its interrogation of the Credo data base, eleven strong targets indicated in the adjacent figure which include examples of priority targets in the following sections.
35
Credo Well JV Gold Project - Immediate Drill Targets
EXAMPLE: Drill ready targets - mineralized zones
Sections show strong supergene gold within shallow weathered zone and limited drilling targeting primary gold zones
Target 10
Complex geology provides multiple structural and lithological settings for gold mineralisation
Reference: Appendix A Drilling Results, Appendix B JORC Table, , DAU ASX Announcement 19 December 2019
Target 9
36
Credo Well JV Gold Project - target mineralised zones
EXAMPLE: Drill ready targets - mineralized zones
Target 1
Ref: Appendix A Drilling Results, Appendix B JORC Table, , DAU ASX Announcement 19 December 2019 | 37 |
Goongarrie Gold Project - Technical Data
Magnetics and geology
Goongarie Tenement and Magnetics | Goongarie "Wrap around" magnetics |
Very distinct untested structure beneath sand and lake sediments. Dampier's Initial field work confirmed the presence of high Fe/Mg greenstone (mafics/ultramafics) and anomalous gold and nickel in this area.
38
Goongarrie Gold Project - Recent drilling results
Auger drill gold results announced to ASX on 21 October 2019
- Goongarrie interpreted solid geology with auger soil line locations showing anomalous gold and nickel results
- Results confirm the presence of ultra-mafic/mafic and felsic rocks
- Area sand and soil covered, unexplored
Ref:, ASX : TNR Announcement 24 October 2019
39
Contact Us
Malcolm Carson (Chairman)
- malcolm.carson@dampiergold.com
Annie Guo (Executive Director)
- annie.guo@dampiergold.com
Appendix A
Drilling Assay Results and Collar Location Files
Hole ID | Sample | From | To | Au | ||||||
CRB0026 | E78702 | 0 | 6 | <0.01 | ||||||
CRB0026 | E78703 | 6 | 12 | <0.01 | ||||||
CRB0026 | E78704 | 12 | 18 | <0.01 | ||||||
CRB0026 | E78705 | 18 | 24 | 0.06 | ||||||
CRB0026 | H65095 | 24 | 26 | 0.85 | ||||||
CRB0026 | H65096 | 26 | 28 | 0.81 | ||||||
CRB0026 | H65097 | 28 | 30 | 0.66 | ||||||
CRB0026 | H65098 | 30 | 32 | 0.52 | ||||||
CRB0026 | H65099 | 32 | 34 | 0.31 | ||||||
CRB0026 | H65100 | 34 | 36 | 0.27 | ||||||
CRB0026 | H65101 | 36 | 38 | 0.16 | ||||||
CRB0026 | H65102 | 38 | 40 | 0.12 | ||||||
CRB0026 | H65103 | 40 | 42 | 0.07 | ||||||
CRB0026 | H65104 | 42 | 43 | 0.02 | ||||||
CRB0094 | D80220 | 0 | 6 | 0.02 | ||||||
CRB0094 | D80221 | 6 | 12 | 0.01 | ||||||
CRB0094 | D80222 | 12 | 18 | 0.03 | ||||||
CRB0094 | D80223 | 18 | 24 | 0.02 | ||||||
CRB0094 | D80224 | 24 | 30 | 0.03 | ||||||
CRB0094 | D80225 | 30 | 36 | 0.02 | ||||||
CRB0094 | D80226 | 36 | 42 | 0.01 | ||||||
CRB0094 | D80227 | 42 | 48 | 0.04 | ||||||
CRB0094 | D80228 | 48 | 54 | 0.07 | ||||||
CRB0094 | D80229 | 54 | 60 | 0.05 | ||||||
CRB0094 | E24561 | 60 | 61 | 0.13 | ||||||
CRB0094 | E24562 | 61 | 62 | 0.35 | ||||||
CRB0094 | E24563 | 62 | 63 | 0.31 | ||||||
CRB0094 | E24564 | 63 | 64 | 0.12 | ||||||
CRB0094 | E24565 | 64 | 65 | 0.08 | ||||||
CRB0094 | E24566 | 65 | 66 | 0.08 | ||||||
CRB0094 | D80231 | 66 | 71 | 0.04 | ||||||
CRB0095 | D80232 | 0 | 6 | <0.01 | ||||||
CRB0095 | D80233 | 6 | 12 | <0.01 | ||||||
CRB0095 | D80234 | 12 | 18 | <0.01 | ||||||
CRB0095 | E24567 | 18 | 19 | 0.02 | ||||||
CRB0095 | E24568 | 19 | 20 | 0.02 | ||||||
CRB0095 | E24569 | 20 | 21 | 0.41 | ||||||
CRB0095 | E24570 | 21 | 22 | 0.17 | ||||||
CRB0095 | E24571 | 22 | 23 | 0.06 | ||||||
CRB0095 | E24572 | 23 | 24 | 0.09 | ||||||
CRB0095 | E24573 | 24 | 25 | 0.40 | ||||||
CRB0095 | E24574 | 25 | 26 | 6.28 | ||||||
CRB0095 | E24575 | 26 | 27 | 2.75 | ||||||
CRB0095 | E24576 | 27 | 28 | 1.70 | ||||||
CRB0095 | E24577 | 28 | 29 | 0.32 | ||||||
CRB0095 | E24578 | 29 | 30 | 0.92 | ||||||
CRB0095 | E24579 | 30 | 31 | 1.41 | ||||||
CRB0095 | E24580 | 31 | 32 | 0.26 | ||||||
CRB0095 | E24581 | 32 | 33 | 0.13 | ||||||
CRB0095 | E24582 | 33 | 34 | 0.33 | ||||||
CRB0095 | E24583 | 34 | 35 | 0.08 |
Page 1 / 20
Hole ID | Sample | From | To | Au | |||
CRB0095 | E24584 | 35 | 36 | 0.04 | |||
CRB0095 | D80238 | 36 | 42 | <0.01 | |||
CRB0095 | D80239 | 42 | 48 | <0.01 | |||
CRB0095 | D80240 | 48 | 54 | 0.01 | |||
CRB0095 | D80241 | 54 | 60 | <0.01 | |||
CRB0095 | D80242 | 60 | 66 | <0.01 | |||
CRB0095 | D80243 | 66 | 72 | <0.01 | |||
CRB0095 | D80244 | 72 | 78 | 0.04 | |||
CRB0096 | D80245 | 0 | 6 | 0.02 | |||
CRB0096 | D80246 | 6 | 12 | <0.01 | |||
CRB0096 | D80247 | 12 | 18 | <0.01 | |||
CRB0096 | D80248 | 18 | 24 | 0.01 | |||
CRB0096 | E24585 | 24 | 25 | 0.01 | |||
CRB0096 | E24586 | 25 | 26 | 0.06 | |||
CRB0096 | E24587 | 26 | 27 | 4.53 | |||
CRB0096 | E24588 | 27 | 28 | 2.43 | |||
CRB0096 | E24589 | 28 | 29 | 1.02 | |||
CRB0096 | E24590 | 29 | 30 | 1.03 | |||
CRB0096 | E24591 | 30 | 31 | 0.61 | |||
CRB0096 | E24592 | 31 | 32 | 0.41 | |||
CRB0096 | E24593 | 32 | 33 | 0.92 | |||
CRB0096 | E24594 | 33 | 34 | 0.81 | |||
CRB0096 | E24595 | 34 | 35 | 0.38 | |||
CRB0096 | E24596 | 35 | 36 | 0.34 | |||
CRB0096 | E24597 | 36 | 37 | 0.18 | |||
CRB0096 | E24598 | 37 | 38 | 0.10 | |||
CRB0096 | E24599 | 38 | 39 | 0.09 | |||
CRB0096 | E24600 | 39 | 40 | 0.18 | |||
CRB0097 | D80252 | 0 | 6 | 0.02 | |||
CRB0097 | D80253 | 6 | 12 | <0.01 | |||
CRB0097 | D80254 | 12 | 18 | <0.01 | |||
CRB0097 | D80255 | 18 | 24 | 0.01 | |||
CRB0097 | E24601 | 24 | 25 | 0.04 | |||
CRB0097 | E24602 | 25 | 26 | 0.27 | |||
CRB0097 | E24603 | 26 | 27 | 0.27 | |||
CRB0097 | E24604 | 27 | 28 | 0.58 | |||
CRB0097 | E24605 | 28 | 29 | 0.55 | |||
CRB0097 | E24606 | 29 | 30 | 4.30 | |||
CRB0097 | E24607 | 30 | 31 | 0.78 | |||
CRB0097 | E24608 | 31 | 32 | 2.03 | |||
CRB0097 | E24609 | 32 | 33 | 0.93 | |||
CRB0097 | E24610 | 33 | 34 | 1.02 | |||
CRB0097 | E24611 | 34 | 35 | 0.77 | |||
CRB0097 | E24612 | 35 | 36 | 0.43 | |||
CRB0097 | D80258 | 36 | 42 | 0.06 | |||
CRB0097 | D80259 | 42 | 48 | <0.01 | |||
CRB0097 | D80260 | 48 | 54 | <0.01 | |||
CRB0097 | D80261 | 54 | 60 | <0.01 | |||
CRB0097 | D80262 | 60 | 64 | <0.01 | |||
CRB0098 | D80263 | 0 | 6 | <0.01 | |||
CRB0098 | D80264 | 6 | 12 | <0.01 |
Page 2 / 20
Hole ID | Sample | From | To | Au | |||
CRB0098 | E24613 | 12 | 13 | 0.14 | |||
CRB0098 | E24614 | 13 | 14 | 0.12 | |||
CRB0098 | E24615 | 14 | 15 | 0.10 | |||
CRB0098 | E24616 | 15 | 16 | 0.12 | |||
CRB0098 | E24617 | 16 | 17 | 0.10 | |||
CRB0098 | E24618 | 17 | 18 | 0.51 | |||
CRB0098 | E24619 | 18 | 19 | 0.45 | |||
CRB0098 | E24620 | 19 | 20 | 0.55 | |||
CRB0098 | E24621 | 20 | 21 | 0.13 | |||
CRB0098 | E24622 | 21 | 22 | 0.17 | |||
CRB0098 | E24623 | 22 | 23 | 0.11 | |||
CRB0098 | E24624 | 23 | 24 | 0.46 | |||
CRB0098 | E24625 | 24 | 25 | 0.29 | |||
CRB0098 | E24626 | 25 | 26 | 0.12 | |||
CRB0098 | E24627 | 26 | 27 | 0.88 | |||
CRB0098 | E24628 | 27 | 28 | 1.22 | |||
CRB0098 | E24629 | 28 | 29 | 0.74 | |||
CRB0098 | E24630 | 29 | 30 | 0.51 | |||
CRB0098 | E24631 | 30 | 31 | 1.88 | |||
CRB0098 | E24632 | 31 | 32 | 0.93 | |||
CRB0098 | E24633 | 32 | 33 | 0.16 | |||
CRB0098 | E24634 | 33 | 34 | 0.12 | |||
CRB0098 | E24635 | 34 | 35 | 0.05 | |||
CRB0098 | E24636 | 35 | 36 | 0.03 | |||
CRB0098 | D80269 | 36 | 42 | 0.03 | |||
CRB0098 | D80270 | 42 | 48 | 0.01 | |||
CRB0098 | D80271 | 48 | 54 | <0.01 | |||
CRB0098 | D80272 | 54 | 57 | <0.01 | |||
CRB0120 | D80417 | 0 | 6 | 0.01 | |||
CRB0120 | D80418 | 6 | 12 | 0.06 | |||
CRB0120 | E24637 | 12 | 13 | 0.13 | |||
CRB0120 | E24638 | 13 | 14 | 0.12 | |||
CRB0120 | E24639 | 14 | 15 | 0.07 | |||
CRB0120 | E24640 | 15 | 16 | 0.06 | |||
CRB0120 | E24641 | 16 | 17 | 0.17 | |||
CRB0120 | E24642 | 17 | 18 | 0.07 | |||
CRB0120 | D80420 | 18 | 24 | 0.08 | |||
CRB0120 | D80421 | 24 | 30 | 0.03 | |||
CRB0120 | D80422 | 30 | 36 | <0.01 | |||
CRB0120 | E24643 | 36 | 37 | 0.02 | |||
CRB0120 | E24644 | 37 | 38 | 0.01 | |||
CRB0120 | E24645 | 38 | 39 | 4.85 | |||
CRB0120 | E24646 | 39 | 40 | 0.55 | |||
CRB0120 | E24647 | 40 | 41 | 0.11 | |||
CRB0120 | E24648 | 41 | 42 | 0.10 | |||
CRB0120 | E24649 | 42 | 43 | 0.05 | |||
CRB0120 | E24650 | 43 | 44 | 0.01 | |||
CRB0120 | E24651 | 44 | 45 | <0.01 | |||
CRB0120 | E24652 | 45 | 46 | 0.03 | |||
CRB0121 | D80425 | 0 | 6 | 0.01 | |||
CRB0121 | D80426 | 6 | 12 | <0.01 |
Page 3 / 20
Hole ID | Sample | From | To | Au | |||
CRB0121 | D80427 | 12 | 18 | <0.01 | |||
CRB0121 | E24653 | 18 | 19 | 8.30 | |||
CRB0121 | E24654 | 19 | 20 | 3.48 | |||
CRB0121 | E24655 | 20 | 21 | 0.26 | |||
CRB0121 | E24656 | 21 | 22 | 0.10 | |||
CRB0121 | E24657 | 22 | 23 | 0.03 | |||
CRB0121 | E24658 | 23 | 24 | 0.03 | |||
CRB0121 | E24659 | 24 | 25 | 0.02 | |||
CRB0121 | E24660 | 25 | 26 | <0.01 | |||
CRB0121 | E24661 | 26 | 27 | 0.02 | |||
CRB0121 | E24662 | 27 | 28 | <0.01 | |||
CRB0121 | E24663 | 28 | 29 | <0.01 | |||
CRB0121 | E24664 | 29 | 30 | <0.01 | |||
CRB0121 | D80430 | 30 | 34 | 0.04 | |||
CRB0122 | D80431 | 0 | 6 | 0.01 | |||
CRB0122 | D80432 | 6 | 12 | 0.01 | |||
CRB0122 | D80433 | 12 | 18 | 0.07 | |||
CRB0122 | D80434 | 18 | 24 | 0.02 | |||
CRB0122 | E24665 | 24 | 25 | 0.03 | |||
CRB0122 | E24666 | 25 | 26 | 0.46 | |||
CRB0122 | E24667 | 26 | 27 | 0.14 | |||
CRB0122 | E24668 | 27 | 28 | 0.01 | |||
CRB0122 | E24669 | 28 | 29 | <0.01 | |||
CRB0122 | E24670 | 29 | 30 | <0.01 | |||
CRB0122 | D80436 | 30 | 36 | 0.04 | |||
CRB0122 | D80437 | 36 | 42 | <0.01 | |||
CRB0122 | D80438 | 42 | 45 | 0.01 | |||
CRB0126 | D80471 | 0 | 6 | 0.01 | |||
CRB0126 | D80472 | 6 | 12 | <0.01 | |||
CRB0126 | D80473 | 12 | 18 | <0.01 | |||
CRB0126 | D80474 | 18 | 24 | 0.01 | |||
CRB0126 | D80475 | 24 | 30 | 0.04 | |||
CRB0126 | D80476 | 30 | 36 | 0.08 | |||
CRB0126 | E24671 | 36 | 37 | 0.07 | |||
CRB0126 | E24672 | 37 | 38 | 0.03 | |||
CRB0126 | E24673 | 38 | 39 | 0.02 | |||
CRB0126 | E24674 | 39 | 40 | <0.01 | |||
CRB0126 | E24675 | 40 | 41 | <0.01 | |||
CRB0126 | E24676 | 41 | 42 | 0.50 | |||
CRB0126 | E24677 | 42 | 43 | 1.28 | |||
CRB0126 | E24678 | 43 | 44 | 0.05 | |||
CRB0126 | E24679 | 44 | 45 | 0.11 | |||
CRB0126 | E24680 | 45 | 46 | 0.04 | |||
CRB0126 | E24681 | 46 | 47 | <0.01 | |||
CRB0126 | E24682 | 47 | 48 | 0.05 | |||
CRB0126 | D80479 | 48 | 54 | 0.03 | |||
CRB0126 | D80480 | 54 | 60 | 0.01 | |||
CRB0126 | D80481 | 60 | 66 | <0.01 | |||
CRB0126 | D80482 | 66 | 72 | <0.01 | |||
CRB0126 | D80483 | 72 | 78 | <0.01 | |||
CRB0233 | KA20197 | 0 | 4 | <0.01 |
Page 4 / 20
Hole ID | Sample | From | To | Au | |||
CRB0233 | KA20198 | 4 | 8 | <0.01 | |||
CRB0233 | KA20199 | 8 | 12 | <0.01 | |||
CRB0233 | KA20200 | 12 | 16 | <0.01 | |||
CRB0233 | KA20201 | 16 | 20 | <0.01 | |||
CRB0233 | KA20202 | 20 | 24 | <0.01 | |||
CRB0233 | KA20203 | 24 | 28 | <0.01 | |||
CRB0233 | KA41161 | 28 | 29 | 2.08 | |||
CRB0233 | KA41162 | 29 | 30 | 3.94 | |||
CRB0233 | KA41163 | 30 | 31 | 1.23 | |||
CRB0233 | KA41164 | 31 | 32 | 1.30 | |||
CRB0233 | KA41165 | 32 | 33 | 1.50 | |||
CRB0233 | KA41166 | 33 | 34 | 0.93 | |||
CRB0233 | KA41167 | 34 | 35 | 0.69 | |||
CRB0233 | KA41168 | 35 | 36 | 0.46 | |||
CRB0242 | KA41173 | 0 | 1 | 0.24 | |||
CRB0242 | KA41174 | 1 | 2 | 58.80 | |||
CRB0242 | KA41175 | 2 | 3 | 0.42 | |||
CRB0242 | KA41176 | 3 | 4 | 0.34 | |||
CRB0242 | KA20272 | 4 | 8 | 0.03 | |||
CRB0242 | KA20273 | 8 | 12 | 0.05 | |||
CRB0242 | KA20274 | 12 | 16 | 0.04 | |||
CRB0242 | KA20275 | 16 | 20 | <0.01 | |||
CRB0242 | KA20276 | 20 | 24 | <0.01 | |||
CRB0242 | KA20277 | 24 | 26 | <0.01 | |||
CRC0007 | 20356 | 45 | 46 | 0.01 | |||
CRC0007 | 20357 | 46 | 47 | 0.01 | |||
CRC0007 | 20358 | 47 | 48 | 0.03 | |||
CRC0007 | 20359 | 48 | 49 | 0.01 | |||
CRC0007 | 20360 | 49 | 50 | 0.01 | |||
CRC0007 | 20361 | 50 | 51 | 0.02 | |||
CRC0007 | 20362 | 51 | 52 | 0.22 | |||
CRC0007 | 20363 | 52 | 53 | 0.93 | |||
CRC0007 | 20364 | 53 | 54 | 0.81 | |||
CRC0007 | 20365 | 54 | 55 | 28.10 | |||
CRC0007 | 20366 | 55 | 56 | 14.40 | |||
CRC0007 | 20367 | 56 | 57 | 6.88 | |||
CRC0007 | 20368 | 57 | 58 | 0.08 | |||
CRC0007 | 20369 | 58 | 59 | 0.07 | |||
CRC0007 | 20370 | 59 | 60 | 0.13 | |||
CRC0007 | 20371 | 60 | 61 | 0.01 | |||
CRC0007 | 20372 | 61 | 62 | <0.01 | |||
CRC0007 | 20373 | 62 | 63 | 0.01 | |||
CRC0022 | 21512 | 32 | 33 | <0.01 | |||
CRC0022 | 21513 | 33 | 34 | <0.01 | |||
CRC0022 | 21514 | 34 | 35 | <0.01 | |||
CRC0022 | 21515B | 35 | 36 | <0.01 | |||
CRC0022 | 21516B | 36 | 37 | <0.01 | |||
CRC0022 | 21517B | 37 | 38 | 0.02 | |||
CRC0022 | 21518A | 38 | 39 | 0.02 | |||
CRC0022 | 21519B | 39 | 40 | 18.97 | |||
CRC0022 | 21520 | 40 | 41 | 4.17 |
Page 5 / 20
Hole ID | Sample | From | To | Au | ||
CRC0022 | 21521 | 41 | 42 | 5.90 | ||
CRC0022 | 21522A | 42 | 43 | 6.00 | ||
CRC0022 | 21523B | 43 | 44 | 2.06 | ||
CRC0022 | 21524B | 44 | 45 | 0.54 | ||
CRC0022 | 21525B | 45 | 46 | 0.40 | ||
CRC0022 | 21526B | 46 | 47 | 0.47 | ||
CRC0022 | 21527B | 47 | 48 | 0.30 | ||
CRC0022 | 21528A | 48 | 49 | 0.26 | ||
CRC0022 | 21529B | 49 | 50 | 0.23 | ||
CRC0022 | 21530A | 50 | 51 | 0.09 | ||
CRC0022 | 21531B | 51 | 52 | 0.14 | ||
CRC0022 | 21532B | 52 | 53 | 0.28 | ||
CRC0022 | 21533 | 53 | 54 | 0.13 | ||
CRC0022 | 21534 | 54 | 55 | 0.05 | ||
CRC0022 | 21535 | 55 | 56 | 0.05 | ||
CRC0022 | 21536 | 56 | 57 | 0.06 | ||
CRC0022 | 21537 | 57 | 58 | 0.87 | ||
CRC0022 | 21538 | 58 | 59 | 0.33 | ||
CRC0022 | 21539A | 59 | 60 | 0.20 | ||
CRC0022 | 21540A | 60 | 61 | 0.11 | ||
CRC0022 | 21541B | 61 | 62 | 4.70 | ||
CRC0022 | 21542B | 62 | 63 | 1.26 | ||
CRC0022 | 21543A | 63 | 64 | 0.24 | ||
CRC0022 | 21544B | 64 | 65 | 8.30 | ||
CRC0022 | 21545B | 65 | 66 | 0.11 | ||
CRC0022 | 21546A | 66 | 67 | 23.25 | ||
CRC0022 | 21547A | 67 | 68 | 17.40 | ||
CRC0022 | 21548A | 68 | 69 | 28.50 | ||
CRC0068 | KA32684 | 0 | 4 | 0.02 | ||
CRC0068 | KA32685 | 4 | 8 | 0.01 | ||
CRC0068 | KA32686 | 8 | 12 | 0.01 | ||
CRC0068 | KA32687 | 12 | 16 | 0.01 | ||
CRC0068 | KA32688 | 16 | 20 | 0.01 | ||
CRC0068 | KA32689 | 20 | 24 | 0.01 | ||
CRC0068 | KA32690 | 24 | 28 | 0.01 | ||
CRC0068 | KA32691 | 28 | 32 | 0.01 | ||
CRC0068 | KA32692 | 32 | 36 | 0.01 | ||
CRC0068 | KA32717 | 36 | 37 | <0.01 | ||
CRC0068 | KA32718 | 37 | 38 | <0.01 | ||
CRC0068 | KA32719 | 38 | 39 | 0.06 | ||
CRC0068 | KA32720 | 39 | 40 | 0.09 | ||
CRC0068 | KA32721 | 40 | 41 | 18.10 | ||
CRC0068 | KA32722 | 41 | 42 | 5.02 | ||
CRC0068 | KA32723 | 42 | 43 | 3.92 | ||
CRC0068 | KA32724 | 43 | 44 | 0.30 | ||
CRC0068 | KA32725 | 44 | 45 | 1.11 | ||
CRC0068 | KA32726 | 45 | 46 | 0.13 | ||
CRC0068 | KA32727 | 46 | 47 | 0.01 | ||
CRC0068 | KA32728 | 47 | 48 | 0.02 | ||
CRC0068 | KA32696 | 48 | 52 | 0.04 | ||
CRC0068 | KA32697 | 52 | 56 | 0.01 |
Page 6 / 20
Hole ID | Sample | From | To | Au | |
CRC0068 | KA32698 | 56 | 60 | <0.01 | |
CRC0068 | KA32699 | 60 | 64 | <0.01 | |
CRC0068 | KA32700 | 64 | 68 | 0.04 | |
CRC0068 | KA32701 | 68 | 72 | 0.01 | |
CRC0068 | KA32702 | 72 | 76 | <0.01 | |
CRC0068 | KA32703 | 76 | 80 | <0.01 | |
CRC0068 | KA32704 | 80 | 84 | <0.01 | |
CRC0068 | KA32705 | 84 | 88 | 0.01 | |
CRC0068 | KA32706 | 88 | 92 | <0.01 | |
CRC0068 | KA32707 | 92 | 96 | <0.01 | |
CRC0068 | KA32708 | 96 | 100 | <0.01 | |
CRC0068 | KA32709 | 100 | 104 | <0.01 | |
CRC0068 | KA32710 | 104 | 108 | <0.01 | |
CRC0068 | KA32711 | 108 | 112 | <0.01 | |
CRC0068 | KA32729 | 112 | 113 | <0.01 | |
CRC0068 | KA32730 | 113 | 114 | 0.16 | |
CRC0068 | KA32731 | 114 | 115 | 0.02 | |
CRC0068 | KA32732 | 115 | 116 | <0.01 | |
CRC0068 | KA32733 | 116 | 117 | <0.01 | |
CRC0068 | KA32734 | 117 | 118 | <0.01 | |
CRC0068 | KA32735 | 118 | 119 | <0.01 | |
CRC0068 | KA32736 | 119 | 120 | <0.01 | |
CRC0068 | KA32714 | 120 | 124 | <0.01 | |
CRC0068 | KA32715 | 124 | 128 | 0.06 | |
CRC0068 | KA32716 | 128 | 130 | <0.01 | |
CRC0069 | KA32737 | 0 | 4 | 0.01 | |
CRC0069 | KA32738 | 4 | 8 | 0.01 | |
CRC0069 | KA60841 | 8 | 9 | 0.09 | |
CRC0069 | KA60842 | 9 | 10 | 0.42 | |
CRC0069 | KA60843 | 10 | 11 | 1.36 | |
CRC0069 | KA60844 | 11 | 12 | 0.31 | |
CRC0069 | KA51381 | 12 | 13 | 1.50 | |
CRC0069 | KA51382 | 13 | 14 | 1.68 | |
CRC0069 | KA51383 | 14 | 15 | 1.22 | |
CRC0069 | KA51384 | 15 | 16 | 0.10 | |
CRC0069 | KA32741 | 16 | 20 | 0.07 | |
CRC0069 | KA32742 | 20 | 24 | 0.01 | |
CRC0069 | KA32743 | 24 | 28 | 0.02 | |
CRC0069 | KA32744 | 28 | 32 | <0.01 | |
CRC0069 | KA32745 | 32 | 36 | 0.01 | |
CRC0069 | KA32746 | 36 | 40 | <0.01 | |
CRC0069 | KA32747 | 40 | 44 | <0.01 | |
CRC0069 | KA32748 | 44 | 48 | <0.01 | |
CRC0069 | KA32749 | 48 | 52 | <0.01 | |
CRC0069 | KA32750 | 52 | 56 | <0.01 | |
CRC0069 | KA32751 | 56 | 60 | 0.01 | |
CRC0069 | KA32752 | 60 | 64 | <0.01 | |
CRC0069 | KA32753 | 64 | 68 | <0.01 | |
CRC0069 | KA32754 | 68 | 72 | <0.01 | |
CRC0069 | KA32755 | 72 | 76 | <0.01 | |
CRC0069 | KA32756 | 76 | 80 | 0.02 |
Page 7 / 20
Hole ID | Sample | From | To | Au | |
CRC0069 | KA51385 | 80 | 81 | 0.66 | |
CRC0069 | KA51386 | 81 | 82 | 0.10 | |
CRC0069 | KA51387 | 82 | 83 | 0.35 | |
CRC0069 | KA51388 | 83 | 84 | 0.34 | |
CRC0069 | KA51389 | 84 | 85 | 0.42 | |
CRC0069 | KA51390 | 85 | 86 | 0.11 | |
CRC0069 | KA51391 | 86 | 87 | 0.06 | |
CRC0069 | KA51392 | 87 | 88 | 0.03 | |
CRC0069 | KA32759 | 88 | 92 | 0.02 | |
CRC0069 | KA32760 | 92 | 96 | 0.01 | |
CRC0069 | KA32761 | 96 | 100 | <0.01 | |
CRC0069 | KA32762 | 100 | 104 | <0.01 | |
CRC0069 | KA32763 | 104 | 108 | 0.02 | |
CRC0069 | KA32764 | 108 | 112 | <0.01 | |
CRC0069 | KA32765 | 112 | 116 | <0.01 | |
CRC0069 | KA32766 | 116 | 120 | <0.01 | |
CRC0069 | KA32767 | 120 | 124 | 0.01 | |
CRC0074 | KA61627 | 0 | 1 | 0.01 | |
CRC0074 | KA61628 | 1 | 2 | 0.01 | |
CRC0074 | KA61629 | 2 | 3 | 0.01 | |
CRC0074 | KA61630 | 3 | 4 | <0.01 | |
CRC0074 | KA61631 | 4 | 5 | <0.01 | |
CRC0074 | KA61632 | 5 | 6 | <0.01 | |
CRC0074 | KA61633 | 6 | 7 | <0.01 | |
CRC0074 | KA61634 | 7 | 8 | <0.01 | |
CRC0074 | KA61635 | 8 | 9 | <0.01 | |
CRC0074 | KA61636 | 9 | 10 | <0.01 | |
CRC0074 | KA61637 | 10 | 11 | <0.01 | |
CRC0074 | KA61638 | 11 | 12 | <0.01 | |
CRC0074 | KA61639 | 12 | 13 | <0.01 | |
CRC0074 | KA61640 | 13 | 14 | 0.01 | |
CRC0074 | KA61641 | 14 | 15 | <0.01 | |
CRC0074 | KA61642 | 15 | 16 | 0.01 | |
CRC0074 | KA61643 | 16 | 20 | <0.01 | |
CRC0074 | KA61644 | 20 | 24 | <0.01 | |
CRC0074 | KA61645 | 24 | 28 | <0.01 | |
CRC0074 | KA61646 | 28 | 32 | 0.01 | |
CRC0074 | KA61647 | 32 | 36 | 0.01 | |
CRC0074 | KA61648 | 36 | 40 | 0.01 | |
CRC0074 | KA61649 | 40 | 42 | <0.01 | |
CRC0074 | KA61650 | 42 | 44 | <0.01 | |
CRC0074 | KA61651 | 44 | 48 | <0.01 | |
CRC0074 | KA61652 | 48 | 52 | <0.01 | |
CRC0074 | KA61653 | 52 | 56 | <0.01 | |
CRC0074 | KA61654 | 56 | 60 | <0.01 | |
CRC0074 | KA61655 | 60 | 64 | <0.01 | |
CRC0074 | KA61656 | 64 | 68 | <0.01 | |
CRC0074 | KA61657 | 68 | 72 | <0.01 | |
CRC0074 | KA61658 | 72 | 76 | 0.02 | |
CRC0074 | KA61659 | 76 | 77 | <0.01 | |
CRC0074 | KA61660 | 77 | 78 | 0.03 |
Page 8 / 20
Hole ID | Sample | From | To | Au | |
CRC0074 | KA61661 | 78 | 79 | 0.14 | |
CRC0074 | KA61662 | 79 | 80 | 12.30 | |
CRC0074 | KA61663 | 80 | 81 | 1.99 | |
CRC0074 | KA61664 | 81 | 82 | 0.27 | |
CRC0074 | KA61665 | 82 | 83 | 0.04 | |
CRC0074 | KA61666 | 83 | 84 | 0.01 | |
CRC0074 | KA61667 | 84 | 85 | 0.01 | |
CRC0074 | KA61668 | 85 | 86 | 0.01 | |
CRC0074 | KA61669 | 86 | 87 | <0.01 | |
CRC0074 | KA61670 | 87 | 88 | <0.01 | |
CRC0074 | KA61671 | 88 | 89 | 0.01 | |
CRC0074 | KA61672 | 89 | 90 | <0.01 | |
CRC0074 | KA61673 | 90 | 91 | 0.02 | |
CRC0074 | KA61674 | 91 | 92 | 0.01 | |
CRC0074 | KA61675 | 92 | 96 | <0.01 | |
CRC0074 | KA61676 | 96 | 100 | 0.01 | |
CRC0074 | KA61677 | 100 | 104 | 0.01 | |
CRC0074 | KA61678 | 104 | 108 | 0.01 | |
CRC0074 | KA61679 | 108 | 112 | <0.01 | |
CRC0074 | KA61680 | 112 | 113 | 0.01 | |
CRC0074 | KA61681 | 113 | 114 | 0.01 | |
CRC0074 | KA61682 | 114 | 115 | <0.01 | |
CRC0074 | KA61683 | 115 | 116 | <0.01 | |
CRC0074 | KA61684 | 116 | 117 | <0.01 | |
CRC0074 | KA61685 | 117 | 118 | 0.01 | |
CRC0074 | KA61686 | 118 | 119 | 0.01 | |
CRC0074 | KA61687 | 119 | 120 | 0.01 | |
CRC0074 | KA61688 | 120 | 121 | <0.01 | |
CRC0074 | KA61689 | 121 | 122 | <0.01 | |
CRC0074 | KA61690 | 122 | 123 | 0.01 | |
CRC0074 | KA61691 | 123 | 124 | 0.01 | |
CRC0074 | KA61692 | 124 | 125 | 0.01 | |
CRC0074 | KA61693 | 125 | 126 | <0.01 | |
CRC0074 | KA61694 | 126 | 127 | <0.01 | |
CRC0074 | KA61695 | 127 | 128 | <0.01 | |
CRC0074 | KA61696 | 128 | 129 | <0.01 | |
CRC0074 | KA61697 | 129 | 130 | <0.01 | |
CRC0074 | KA61698 | 130 | 131 | <0.01 | |
CRC0074 | KA61699 | 131 | 132 | <0.01 | |
CRC0074 | KA61700 | 132 | 136 | 0.01 | |
CRC0074 | KA61701 | 136 | 140 | <0.01 | |
CRC0074 | KA61702 | 140 | 144 | <0.01 | |
CRC0074 | KA61703 | 144 | 148 | <0.01 | |
CRC0074 | KA61704 | 148 | 152 | 0.01 | |
CRC0074 | KA61705 | 152 | 156 | 0.01 | |
CRC0074 | KA61706 | 156 | 158 | 0.01 | |
CRC0074 | KA61707 | 158 | 159 | <0.01 | |
CRC0074 | KA61708 | 159 | 160 | <0.01 | |
CRC0074 | KA61709 | 160 | 161 | <0.01 | |
CRC0074 | KA61710 | 161 | 162 | 0.01 | |
CRC0074 | KA61711 | 162 | 164 | <0.01 |
Page 9 / 20
Hole ID | Sample | From | To | Au | |||||
CRC0074 | KA61712 | 164 | 168 | <0.01 | |||||
CRC149 | CW03061 | 0 | 4 | <0.01 | |||||
CRC149 | CW03062 | 4 | 8 | <0.01 | |||||
CRC149 | CW03063 | 8 | 12 | <0.01 | |||||
CRC149 | CW03064 | 12 | 16 | <0.01 | |||||
CRC149 | CW03065 | 16 | 20 | 0.02 | |||||
CRC149 | CW03066 | 20 | 24 | <0.01 | |||||
CRC149 | CW03067 | 24 | 28 | <0.01 | |||||
CRC149 | CW03068 | 28 | 32 | <0.01 | |||||
CRC149 | CW03069 | 32 | 36 | 0.07 | |||||
CRC149 | CW03071 | 36 | 40 | <0.01 | |||||
CRC149 | CW00712 | 40 | 41 | <0.01 | |||||
CRC149 | CW00713 | 41 | 42 | <0.01 | |||||
CRC149 | CW00714 | 42 | 43 | 21.90 | |||||
CRC149 | CW00715 | 43 | 44 | 0.34 | |||||
CRC149 | CW00716 | 44 | 45 | 0.10 | |||||
CRC149 | CW00717 | 45 | 46 | 0.36 | |||||
CRC149 | CW00718 | 46 | 47 | <0.01 | |||||
CRC149 | CW00719 | 47 | 48 | 0.18 | |||||
CRC149 | CW03072 | 48 | 52 | <0.01 | |||||
CRC149 | CW03073 | 52 | 55 | <0.01 | |||||
CRC154 | CW03292 | 0 | 4 | <0.01 | |||||
CRC154 | CW03293 | 4 | 8 | <0.01 | |||||
CRC154 | CW03294 | 8 | 12 | <0.01 | |||||
CRC154 | CW03295 | 12 | 16 | <0.01 | |||||
CRC154 | CW03296 | 16 | 20 | <0.01 | |||||
CRC154 | CW03297 | 20 | 24 | <0.01 | |||||
CRC154 | CW01355 | 24 | 25 | 0.06 | |||||
CRC154 | CW01356 | 25 | 26 | 0.06 | |||||
CRC154 | CW01357 | 26 | 27 | 0.15 | |||||
CRC154 | CW01358 | 27 | 28 | 4.44 | |||||
CRC154 | CW01359 | 28 | 29 | 11.50 | |||||
CRC154 | CW01361 | 29 | 30 | 54.20 | |||||
CRC154 | CW01362 | 30 | 31 | 59.90 | |||||
CRC154 | CW01363 | 31 | 32 | 0.06 | |||||
CRC154 | CW01364 | 32 | 33 | 0.07 | |||||
CRC154 | CW01365 | 33 | 34 | 0.02 | |||||
CRC154 | CW01366 | 34 | 35 | 2.95 | |||||
CRC154 | CW01367 | 35 | 36 | 3.14 | |||||
CRC154 | CW03298 | 36 | 40 | <0.01 | |||||
CRC157 | CW03181 | 24 | 28 | <0.01 | |||||
CRC157 | CW03182 | 28 | 32 | <0.01 | |||||
CRC157 | CW03183 | 32 | 36 | <0.01 | |||||
CRC157 | CW00802 | 36 | 37 | <0.01 | |||||
CRC157 | CW00803 | 37 | 38 | <0.01 | |||||
CRC157 | CW00804 | 38 | 39 | 0.14 | |||||
CRC157 | CW00805 | 39 | 40 | 68.50 | |||||
CRC157 | CW00806 | 40 | 41 | 0.17 | |||||
CRC157 | CW00807 | 41 | 42 | <0.01 | |||||
CRC157 | CW03184 | 42 | 46 | <0.01 | |||||
CRC157 | CW03185 | 46 | 50 | <0.01 |
Page 10 / 20
Hole ID | Sample | From | To | Au | |||||
CRC157 | CW03186 | 50 | 54 | 0.01 | |||||
CRC157 | CW03187 | 54 | 58 | <0.01 | |||||
CRC157 | CW03188 | 58 | 62 | <0.01 | |||||
CRC157 | CW03189 | 62 | 66 | <0.01 | |||||
CRC157 | CW03191 | 66 | 70 | 0.01 | |||||
CRC157 | CW03192 | 70 | 72 | 12.40 | |||||
CRC157 | CW00842 | 72 | 73 | 1.20 | |||||
CRC157 | CW00843 | 73 | 74 | 0.62 | |||||
CRC157 | CW00844 | 74 | 75 | 0.04 | |||||
CRC157 | CW00845 | 75 | 76 | 0.02 | |||||
CRC157 | CW03193 | 76 | 80 | 0.08 | |||||
CRC157 | CW03194 | 80 | 84 | <0.01 | |||||
CRC157 | CW03195 | 84 | 88 | <0.01 | |||||
CRC157 | CW03196 | 88 | 91 | <0.01 | |||||
CTRB0070 | 11308 | 0 | 5 | 0.09 | |||||
CTRB0070 | 11309 | 5 | 10 | 0.06 | |||||
CTRB0070 | 11310 | 10 | 15 | <0.01 | |||||
CTRB0070 | 11311 | 15 | 20 | 0.01 | |||||
CTRB0070 | 11312 | 20 | 25 | 1.00 | |||||
CTRB0070 | 11313 | 25 | 30 | 0.07 | |||||
CTRB0070 | 11314 | 30 | 35 | 0.12 | |||||
CTRB0070 | 11315 | 35 | 40 | ||||||
CTRB0070 | 11316 | 40 | 45 | 10.00 | |||||
CTRB0070 | 11317 | 45 | 50 | 0.01 | |||||
CTRB0070 | 11318 | 50 | 55 | 0.10 | |||||
CTRB0070 | 11319 | 55 | 56 | 0.05 | |||||
CTRB0094 | 11285 | 0 | 5 | 0.04 | |||||
CTRB0094 | 11286 | 5 | 10 | 0.01 | |||||
CTRB0094 | 11287 | 10 | 15 | 0.06 | |||||
CTRB0094 | 11288 | 15 | 20 | 0.04 | |||||
CTRB0094 | 11289B | 20 | 25 | 0.09 | |||||
CTRB0094 | 11290A | 25 | 30 | 4.16 | |||||
CTRB0094 | 11291A | 30 | 35 | 0.45 | |||||
CTRB0094 | 11292A | 35 | 40 | 0.18 | |||||
CTRB0094 | 11293A | 40 | 45 | 0.15 | |||||
CTRB0094 | 11294A | 45 | 50 | 0.10 | |||||
CTRB0094 | 11295A | 50 | 54 | 0.06 | |||||
CTRB0095 | 9487 | 0 | 5 | 0.01 | |||||
CTRB0095 | 9488 | 5 | 10 | <0.01 | |||||
CTRB0095 | 10686 | 10 | 11 | 0.04 | |||||
CTRB0095 | 10687 | 11 | 12 | 0.19 | |||||
CTRB0095 | 10688 | 12 | 13 | 0.21 | |||||
CTRB0095 | 10689 | 13 | 14 | 0.06 | |||||
CTRB0095 | 10690 | 14 | 15 | 0.04 | |||||
CTRB0095 | 10691 | 15 | 16 | 0.09 | |||||
CTRB0095 | 10692 | 16 | 17 | 0.07 | |||||
CTRB0095 | 10693 | 17 | 18 | 0.10 | |||||
CTRB0095 | 10694 | 18 | 19 | 0.05 | |||||
CTRB0095 | 10695 | 19 | 20 | 0.19 | |||||
CTRB0095 | 10696 | 20 | 21 | 0.15 | |||||
CTRB0095 | 10697 | 21 | 22 | 0.17 |
Page 11 / 20
Hole ID | Sample | From | To | Au | |||||
CTRB0095 | 10698 | 22 | 23 | 0.02 | |||||
CTRB0095 | 10699 | 23 | 24 | 0.04 | |||||
CTRB0095 | 10700 | 24 | 25 | 0.14 | |||||
CTRB0095 | 9492 | 25 | 30 | <0.01 | |||||
CTRB0095 | 9493 | 30 | 35 | 0.04 | |||||
CTRB0095 | 9494 | 35 | 40 | <92 | |||||
CTRB0095 | 9495 | 40 | 45 | 0.02 | |||||
CTRB0095 | 9496 | 45 | 50 | 0.01 | |||||
CTRB0095 | 9497 | 50 | 52 | 0.02 | |||||
CTRB0096 | 9498 | 0 | 5 | <0.01 | |||||
CTRB0096 | 9499 | 5 | 10 | <0.01 | |||||
CTRB0096 | 9500 | 10 | 15 | 0.02 | |||||
CTRB0096 | 9501 | 15 | 20 | <0.01 | |||||
CTRB0096 | 10701 | 20 | 25 | 0.16 | |||||
CTRB0096 | 9503 | 25 | 30 | 0.05 | |||||
CTRB0096 | 9504 | 30 | 35 | 0.06 | |||||
CTRB0096 | 9505 | 35 | 40 | 0.01 | |||||
CTRB0096 | 9506 | 40 | 45 | 0.06 | |||||
CTRB0096 | 9507 | 45 | 47 | 8.56 | |||||
CTRB0096 | 10702 | 47 | 48 | 74.00 | |||||
CTRB0096 | 10703 | 48 | 49 | 6.98 | |||||
CTRB0096 | 10704 | 49 | 50 | 6.76 | |||||
CTRB0096 | 10705 | 50 | 51 | 1.63 | |||||
CTRB0096 | 9508 | 51 | 55 | 0.47 | |||||
DQRC004 | R1250001 | 0 | 1 | <0.01 | |||||
DQRC004 | R1250002 | 1 | 2 | <0.01 | |||||
DQRC004 | R1250003 | 2 | 3 | <0.01 | |||||
DQRC004 | R1250004 | 3 | 4 | <0.01 | |||||
DQRC004 | R1250005 | 4 | 5 | <0.01 | |||||
DQRC004 | R1250006 | 5 | 6 | <0.01 | |||||
DQRC004 | R1250007 | 6 | 7 | <0.01 | |||||
DQRC004 | R1250008 | 7 | 8 | <0.01 | |||||
DQRC004 | R1250009 | 8 | 9 | <0.01 | |||||
DQRC004 | R1250010 | 9 | 10 | <0.01 | |||||
DQRC004 | R1250011 | 10 | 11 | <0.01 | |||||
DQRC004 | R1250012 | 11 | 12 | <0.01 | |||||
DQRC004 | R1250013 | 12 | 13 | <0.01 | |||||
DQRC004 | R1250014 | 13 | 14 | <0.01 | |||||
DQRC004 | R1250015 | 14 | 15 | <0.01 | |||||
DQRC004 | R1250016 | 15 | 16 | <0.01 | |||||
DQRC004 | R1250017 | 16 | 17 | <0.01 | |||||
DQRC004 | R1250018 | 17 | 18 | <0.01 | |||||
DQRC004 | R1250019 | 18 | 19 | <0.01 | |||||
DQRC004 | R1250020 | 19 | 20 | <0.01 | |||||
DQRC004 | R1250021 | 20 | 21 | <0.01 | |||||
DQRC004 | R1250022 | 21 | 22 | <0.01 | |||||
DQRC004 | R1250023 | 22 | 23 | <0.01 | |||||
DQRC004 | R1250024 | 23 | 24 | <0.01 | |||||
DQRC004 | R1250025 | 24 | 25 | <0.01 | |||||
DQRC004 | R1250026 | 25 | 26 | <0.01 | |||||
DQRC004 | R1250027 | 26 | 27 | <0.01 |
Page 12 / 20
Hole ID | Sample | From | To | Au | |||
DQRC004 | R1250028 | 27 | 28 | <0.01 | |||
DQRC004 | R1250029 | 28 | 29 | <0.01 | |||
DQRC004 | R1250030 | 29 | 30 | <0.01 | |||
DQRC004 | R1250031 | 30 | 31 | <0.01 | |||
DQRC004 | R1250032 | 31 | 32 | <0.01 | |||
DQRC004 | R1250033 | 32 | 33 | <0.01 | |||
DQRC004 | R1250034 | 33 | 34 | 1.04 | |||
DQRC004 | R1250035 | 34 | 35 | <0.01 | |||
DQRC004 | R1250036 | 35 | 36 | 1.98 | |||
DQRC004 | R1250037 | 36 | 37 | 0.83 | |||
DQRC004 | R1250038 | 37 | 38 | 0.40 | |||
DQRC004 | R1250041 | 38 | 39 | <0.01 | |||
DQRC004 | R1250042 | 39 | 40 | 0.23 | |||
DQRC004 | R1250043 | 40 | 41 | <0.01 | |||
DQRC004 | R1250044 | 41 | 42 | <0.01 | |||
DQRC004 | R1250045 | 42 | 43 | 25.40 | |||
DQRC004 | R1250046 | 43 | 44 | 36.40 | |||
DQRC004 | R1250047 | 44 | 45 | 0.80 | |||
DQRC004 | R1250048 | 45 | 46 | 1.82 | |||
DQRC004 | R1250049 | 46 | 47 | <0.01 | |||
DQRC004 | R1250050 | 47 | 48 | <0.01 | |||
DQRC004 | R1250051 | 48 | 49 | 4.35 | |||
DQRC004 | R1250052 | 49 | 50 | <0.01 | |||
DQRC004 | R1250053 | 50 | 51 | 0.28 | |||
DQRC004 | R1250054 | 51 | 52 | 0.35 | |||
DQRC004 | R1250055 | 52 | 53 | 0.25 | |||
DQRC004 | R1250056 | 53 | 54 | 0.28 | |||
DQRC004 | R1250057 | 54 | 55 | 0.90 | |||
DQRC004 | R1250058 | 55 | 56 | 0.46 | |||
DQRC004 | R1250059 | 56 | 57 | 1.13 | |||
DQRC004 | R1250060 | 57 | 58 | 0.18 | |||
DQRC004 | R1250061 | 58 | 59 | 0.11 | |||
DQRC004 | R1250062 | 59 | 60 | 0.41 | |||
DQRC004 | R1250063 | 60 | 61 | <0.01 | |||
DQRC004 | R1250064 | 61 | 62 | <0.01 | |||
DQRC004 | R1250065 | 62 | 63 | <0.01 | |||
DQRC004 | R1250066 | 63 | 64 | <0.01 | |||
DQRC004 | R1250067 | 64 | 65 | <0.01 | |||
DQRC004 | R1250068 | 65 | 66 | <0.01 | |||
DQRC004 | R1250069 | 66 | 67 | <0.01 | |||
DQRC004 | R1250070 | 67 | 68 | 0.16 | |||
DQRC004 | R1250071 | 68 | 69 | 0.12 | |||
DQRC004 | R1250072 | 69 | 70 | <0.01 | |||
DQRC004 | R1250073 | 70 | 71 | 0.24 | |||
DQRC004 | R1250074 | 71 | 72 | <0.01 | |||
DQRC004 | R1250075 | 72 | 73 | <0.01 | |||
DQRC004 | R1250076 | 73 | 74 | <0.01 | |||
DQRC004 | R1250077 | 74 | 75 | <0.01 | |||
DQRC004 | R1250078 | 75 | 76 | <0.01 | |||
DQRC004 | R1250081 | 76 | 77 | <0.01 | |||
DQRC004 | R1250082 | 77 | 78 | <0.01 |
Page 13 / 20
Hole ID | Sample | From | To | Au | ||
DQRC004 | R1250083 | 78 | 79 | <0.01 | ||
DQRC004 | R1250084 | 79 | 80 | <0.01 | ||
DQRC004 | R1250085 | 80 | 81 | 0.34 | ||
DQRC004 | R1250086 | 81 | 82 | <0.01 | ||
DQRC004 | R1250087 | 82 | 83 | <0.01 | ||
DQRC004 | R1250088 | 83 | 84 | <0.01 | ||
DQRC004 | R1250089 | 84 | 85 | <0.01 | ||
DQRC004 | R1250090 | 85 | 86 | <0.01 | ||
DQRC004 | R1250091 | 86 | 87 | <0.01 | ||
DQRC004 | R1250092 | 87 | 88 | <0.01 | ||
DQRC004 | R1250093 | 88 | 89 | <0.01 | ||
DQRC004 | R1250094 | 89 | 90 | <0.01 | ||
DQRC004 | R1250095 | 90 | 91 | <0.01 | ||
DQRC004 | R1250096 | 91 | 92 | <0.01 | ||
DQRC004 | R1250097 | 92 | 93 | <0.01 | ||
DQRC004 | R1250098 | 93 | 94 | <0.01 | ||
DQRC004 | R1250099 | 94 | 95 | <0.01 | ||
DQRC004 | R1250100 | 95 | 96 | <0.01 | ||
DQRC004 | R1250101 | 96 | 97 | <0.01 | ||
DQRC004 | R1250102 | 97 | 98 | <0.01 | ||
DQRC004 | R1250103 | 98 | 99 | <0.01 | ||
DQRC004 | R1250104 | 99 | 100 | <0.01 | ||
DQRC004 | R1250105 | 100 | 101 | <0.01 | ||
DQRC004 | R1250106 | 101 | 102 | <0.01 | ||
DQRC004 | R1250107 | 102 | 103 | <0.01 | ||
DQRC004 | R1250108 | 103 | 104 | <0.01 | ||
DQRC004 | R1250109 | 104 | 105 | <0.01 | ||
DQRC004 | R1250110 | 105 | 106 | <0.01 | ||
DQRC004 | R1250111 | 106 | 107 | <0.01 | ||
DQRC004 | R1250112 | 107 | 108 | <0.01 | ||
DQRC004 | R1250113 | 108 | 109 | <0.01 | ||
DQRC004 | R1250114 | 109 | 110 | <0.01 | ||
DQRC004 | R1250115 | 110 | 111 | <0.01 | ||
DQRC004 | R1250116 | 111 | 112 | <0.01 | ||
DQRC004 | R1250117 | 112 | 113 | <0.01 | ||
DQRC004 | R1250118 | 113 | 114 | <0.01 | ||
DQRC004 | R1250121 | 114 | 115 | <0.01 | ||
DQRC004 | R1250122 | 115 | 116 | <0.01 | ||
DQRC004 | R1250123 | 116 | 117 | <0.01 | ||
DQRC004 | R1250124 | 117 | 118 | <0.01 | ||
DQRC004 | R1250125 | 118 | 119 | <0.01 | ||
DQRC004 | R1250126 | 119 | 120 | <0.01 | ||
KRC26 | S308 | 0 | 2 | 1.01 | ||
KRC26 | S309 | 2 | 4 | 0.53 | ||
KRC26 | S310 | 4 | 6 | <0.01 | ||
KRC26 | S311 | 6 | 8 | <0.01 | ||
KRC26 | S312 | 8 | 10 | 0.04 | ||
KRC26 | S313 | 10 | 12 | <0.01 | ||
KRC26 | S314 | 12 | 14 | <0.01 | ||
KRC26 | S315 | 14 | 16 | 0.04 | ||
ZJVRC007 | ZC00142 | 0 | 4 |
Page 14 / 20
Hole ID | Sample | From | To | Au | ||
ZJVRC007 | ZC00143 | 4 | 8 | |||
ZJVRC007 | ZC00144 | 8 | 12 | |||
ZJVRC007 | ZC00145 | 12 | 16 | |||
ZJVRC007 | ZC00146 | 16 | 20 | |||
ZJVRC007 | ZC00147 | 20 | 24 | |||
ZJVRC007 | ZC00148 | 24 | 28 | |||
ZJVRC007 | ZC00149 | 28 | 32 | 0.07 | ||
ZJVRC007 | ZC00151 | 32 | 36 | 0.06 | ||
ZJVRC007 | ZC00152 | 36 | 40 | 0.04 | ||
ZJVRC007 | ZC00153 | 40 | 44 | |||
ZJVRC007 | ZC00154 | 44 | 48 | |||
ZJVRC007 | ZC00155 | 48 | 52 | |||
ZJVRC007 | ZC00156 | 52 | 56 | |||
ZJVRC007 | ZC00157 | 56 | 60 | 0.02 | ||
ZJVRC007 | ZC00158 | 60 | 64 | |||
ZJVRC007 | Z005635 | 60 | 61 | <0.01 | ||
ZJVRC007 | Z005636 | 61 | 62 | 0.02 | ||
ZJVRC007 | Z005637 | 62 | 63 | <0.01 | ||
ZJVRC007 | Z005638 | 63 | 64 | <0.01 | ||
ZJVRC007 | ZC00159 | 64 | 68 | 0.99 | ||
ZJVRC007 | Z005639 | 64 | 65 | <0.01 | ||
ZJVRC007 | Z005641 | 65 | 66 | 1.63 | ||
ZJVRC007 | Z005642 | 66 | 67 | 1.44 | ||
ZJVRC007 | Z005643 | 67 | 68 | 0.35 | ||
ZJVRC007 | ZC00161 | 68 | 72 | 3.12 | ||
ZJVRC007 | Z005644 | 68 | 69 | 2.10 | ||
ZJVRC007 | Z005645 | 69 | 70 | 3.18 | ||
ZJVRC007 | Z005646 | 70 | 71 | 2.62 | ||
ZJVRC007 | Z005647 | 71 | 72 | 0.07 | ||
ZJVRC007 | ZC00162 | 72 | 76 | 0.01 | ||
ZJVRC007 | Z005648 | 72 | 73 | 0.03 | ||
ZJVRC007 | Z005649 | 73 | 74 | 0.02 | ||
ZJVRC007 | Z005651 | 74 | 75 | 0.10 | ||
ZJVRC007 | Z005652 | 75 | 76 | 0.03 | ||
ZJVRC007 | ZC00163 | 76 | 80 | 0.13 | ||
ZJVRC007 | ZC00164 | 80 | 84 | <0.01 | ||
ZJVRC007 | ZC00165 | 84 | 88 | <0.01 | ||
ZJVRC007 | ZC00166 | 88 | 92 | <0.01 | ||
ZJVRC007 | ZC00167 | 92 | 96 | <0.01 | ||
ZJVRC007 | ZC00168 | 96 | 100 | 0.01 | ||
ZJVRC007 | ZC00169 | 100 | 103 | 0.05 | ||
ZJVRC007 | ZC00171 | 103 | 106 | <0.01 | ||
ZJVRC033 | PT3641 | 0 | 4 | 0.03 | ||
ZJVRC033 | PT3642 | 4 | 8 | 0.02 | ||
ZJVRC033 | PT3643 | 8 | 12 | <0.01 | ||
ZJVRC033 | PT3644 | 12 | 16 | <0.01 | ||
ZJVRC033 | PT3645 | 16 | 20 | <0.01 | ||
ZJVRC033 | PT3646 | 20 | 24 | <0.01 | ||
ZJVRC033 | PT3647 | 24 | 28 | <0.01 | ||
ZJVRC033 | PT3648 | 28 | 32 | <0.01 | ||
ZJVRC033 | PT3649 | 32 | 36 | <0.01 |
Page 15 / 20
Hole ID | Sample | From | To | Au | |||||
ZJVRC033 | PT3651 | 36 | 40 | <0.01 | |||||
ZJVRC033 | PT3652 | 40 | 44 | <0.01 | |||||
ZJVRC033 | PT3653 | 44 | 48 | <0.01 | |||||
ZJVRC033 | PT3654 | 48 | 52 | 0.09 | |||||
ZJVRC033 | PT3655 | 52 | 56 | <0.01 | |||||
ZJVRC033 | PT3656 | 56 | 60 | <0.01 | |||||
ZJVRC033 | PT3657 | 60 | 64 | 0.02 | |||||
ZJVRC033 | PT3658 | 64 | 68 | 0.02 | |||||
ZJVRC033 | PT3659 | 68 | 72 | <0.01 | |||||
ZJVRC033 | PT3661 | 72 | 76 | <0.01 | |||||
ZJVRC033 | PT3662 | 76 | 80 | <0.01 | |||||
ZJVRC033 | PT3663 | 80 | 84 | <0.01 | |||||
ZJVRC033 | PT3664 | 84 | 88 | 0.02 | |||||
ZJVRC033 | PT3665 | 88 | 92 | <0.01 | |||||
ZJVRC033 | PT3666 | 92 | 96 | <0.01 | |||||
ZJVRC033 | PT3667 | 96 | 100 | <0.01 | |||||
ZJVRC033 | PT3668 | 100 | 104 | 0.97 | |||||
ZJVRC033 | PT3669 | 104 | 108 | 5.31 | |||||
ZJVRC033 | PT3671 | 108 | 112 | 0.02 | |||||
ZJVRC033 | PT3672 | 112 | 116 | 0.04 | |||||
ZJVRC033 | PT3673 | 116 | 120 | <0.01 | |||||
ZJVRC033 | PT3674 | 120 | 124 | 0.04 | |||||
ZJVRC033 | PT3675 | 124 | 128 | 0.04 | |||||
ZJVRC033 | PT3676 | 128 | 132 | <0.01 | |||||
ZJVRC033 | PT3677 | 132 | 136 | 0.10 | |||||
ZJVRC033 | PT3678 | 136 | 140 | 0.06 | |||||
ZJVRC033 | PT3679 | 140 | 142 | 0.03 | |||||
ZRB007 | Z000133 | 0 | 4 | <0.01 | |||||
ZRB007 | Z000134 | 4 | 8 | <0.01 | |||||
ZRB007 | Z000135 | 8 | 12 | <0.01 | |||||
ZRB007 | Z000136 | 12 | 16 | <0.01 | |||||
ZRB007 | Z000137 | 16 | 20 | <0.01 | |||||
ZRB007 | Z000138 | 20 | 24 | <0.01 | |||||
ZRB007 | Z000139 | 24 | 28 | 0.01 | |||||
ZRB007 | Z000141 | 28 | 32 | 0.01 | |||||
ZRB007 | Z000142 | 32 | 36 | 0.03 | |||||
ZRB007 | Z000143 | 36 | 40 | <0.01 | |||||
ZRB007 | Z000144 | 40 | 44 | <0.01 | |||||
ZRB007 | Z000145 | 44 | 48 | 0.01 | |||||
ZRB007 | Z000146 | 48 | 52 | <0.01 | |||||
ZRB007 | Z000147 | 52 | 56 | <0.01 | |||||
ZRB007 | Z000148 | 56 | 60 | <0.01 | |||||
ZRB007 | Z000149 | 60 | 64 | <0.01 | |||||
ZRB007 | Z000151 | 64 | 68 | <0.01 | |||||
ZRB007 | Z000152 | 68 | 72 | <0.01 | |||||
ZRB007 | Z000153 | 72 | 76 | 1.11 | |||||
ZRB007 | Z000154 | 76 | 80 | 0.21 | |||||
ZRB007 | Z000155 | 80 | 84 | 0.17 | |||||
ZRB007 | Z000156 | 84 | 88 | 0.25 | |||||
ZRB405 | Z007315 | 0 | 4 | <0.01 | |||||
ZRB405 | Z007316 | 4 | 8 | <0.01 |
Page 16 / 20
Hole ID | Sample | From | To | Au | |||
ZRB405 | Z007317 | 8 | 12 | <0.01 | |||
ZRB405 | Z007318 | 12 | 16 | <0.01 | |||
ZRB405 | Z007319 | 16 | 20 | <0.01 | |||
ZRB405 | Z007321 | 20 | 24 | <0.01 | |||
ZRB405 | Z007322 | 24 | 28 | <0.01 | |||
ZRB405 | Z007323 | 28 | 32 | <0.01 | |||
ZRB405 | Z007324 | 32 | 36 | <0.01 | |||
ZRB405 | Z007325 | 36 | 40 | <0.01 | |||
ZRB405 | Z007326 | 40 | 44 | <0.01 | |||
ZRB405 | Z007327 | 44 | 48 | <0.01 | |||
ZRB405 | Z007328 | 48 | 52 | <0.01 | |||
ZRB405 | Z007329 | 52 | 56 | <0.01 | |||
ZRB405 | Z007330 | 56 | 60 | <0.01 | |||
ZRB405 | Z007332 | 60 | 64 | 2.57 | |||
ZRB405 | Z007333 | 64 | 67 | 0.06 | |||
ZRB437 | B00138 | 0 | 4 | <0.01 | |||
ZRB437 | B00139 | 4 | 8 | <0.01 | |||
ZRB437 | B00141 | 8 | 12 | <0.01 | |||
ZRB437 | B00142 | 12 | 16 | <0.01 | |||
ZRB437 | B00143 | 16 | 20 | <0.01 | |||
ZRB437 | B00144 | 20 | 24 | <0.01 | |||
ZRB437 | B00145 | 24 | 28 | <0.01 | |||
ZRB437 | B00146 | 28 | 32 | 0.02 | |||
ZRB437 | B00147 | 32 | 36 | 0.11 | |||
ZRB437 | B00148 | 36 | 40 | 1.08 | |||
ZRB437 | B00149 | 40 | 44 | 3.86 | |||
ZRB437 | B00151 | 44 | 48 | 2.38 | |||
ZRB437 | B00152 | 48 | 52 | 0.12 | |||
ZRB437 | B00153 | 52 | 56 | 0.27 | |||
ZRB437 | B00154 | 56 | 60 | 0.23 | |||
ZRB437 | B00155 | 60 | 64 | 0.15 | |||
ZRB437 | B00156 | 64 | 68 | 0.11 | |||
ZRB437 | B00157 | 68 | 69 | 0.17 | |||
ZULB380 | B177368 | 0 | 4 | 0.01 | |||
ZULB380 | B177369 | 4 | 8 | <0.01 | |||
ZULB380 | B177370 | 8 | 12 | <0.01 | |||
ZULB380 | B177371 | 12 | 16 | <0.01 | |||
ZULB380 | B177372 | 16 | 20 | <0.01 | |||
ZULB380 | B177373 | 20 | 24 | <0.01 | |||
ZULB380 | B177374 | 24 | 28 | <0.01 | |||
ZULB380 | B177375 | 28 | 32 | <0.01 | |||
ZULB380 | B177376 | 32 | 36 | <0.01 | |||
ZULB380 | B177377 | 36 | 40 | <0.01 | |||
ZULB380 | B177378 | 40 | 44 | <0.01 | |||
ZULB380 | B177379 | 44 | 48 | <0.01 | |||
ZULB380 | B177380 | 48 | 52 | <0.01 | |||
ZULB380 | B177381 | 52 | 56 | <0.01 | |||
ZULB380 | B177382 | 56 | 60 | 0.87 | |||
ZULB380 | B177383 | 60 | 64 | 1.02 | |||
ZULB380 | B177384 | 64 | 68 | 0.53 | |||
ZULB380 | B177385 | 68 | 72 | 0.03 |
Page 17 / 20
Hole ID | Sample | From | To | Au | ||
ZUR049 | Q27260 | 0 | 4 | <0.01 | ||
ZUR049 | Q27261 | 4 | 8 | <0.01 | ||
ZUR049 | Q27262 | 8 | 12 | <0.01 | ||
ZUR049 | Q27263 | 12 | 16 | <0.01 | ||
ZUR049 | Q27264 | 16 | 20 | <0.01 | ||
ZUR049 | Q27265 | 20 | 24 | <0.01 | ||
ZUR049 | Q27266 | 24 | 28 | <0.01 | ||
ZUR049 | Q27267 | 28 | 32 | <0.01 | ||
ZUR049 | Q27268 | 32 | 36 | <0.01 | ||
ZUR049 | Q27269 | 36 | 40 | <0.01 | ||
ZUR049 | Q27270 | 40 | 44 | <0.01 | ||
ZUR049 | Q27271 | 44 | 48 | <0.01 | ||
ZUR049 | Q27272 | 48 | 52 | <0.01 | ||
ZUR049 | Q27273 | 52 | 56 | <0.01 | ||
ZUR049 | Q27274 | 56 | 60 | 0.28 | ||
ZUR049 | Q27275 | 60 | 64 | 0.45 | ||
ZUR049 | Q27277 | 64 | 68 | 0.38 | ||
ZUR049 | Q27278 | 68 | 72 | 1.19 | ||
ZUR063 | R32747 | 0 | 4 | <0.01 | ||
ZUR063 | R32748 | 4 | 8 | <0.01 | ||
ZUR063 | R32749 | 8 | 12 | <0.01 | ||
ZUR063 | R32750 | 12 | 16 | <0.01 | ||
ZUR063 | R32751 | 16 | 20 | <0.01 | ||
ZUR063 | R32752 | 20 | 24 | <0.01 | ||
ZUR063 | R32753 | 24 | 28 | <0.01 | ||
ZUR063 | R32754 | 28 | 32 | <0.01 | ||
ZUR063 | R32755 | 32 | 36 | <0.01 | ||
ZUR063 | R32756 | 36 | 40 | <0.01 | ||
ZUR063 | R32757 | 40 | 44 | <0.01 | ||
ZUR063 | R32758 | 44 | 48 | <0.01 | ||
ZUR063 | R32759 | 48 | 52 | 0.15 | ||
ZUR063 | R32760 | 52 | 56 | <0.01 | ||
ZUR063 | R32761 | 56 | 60 | <0.01 | ||
ZUR063 | R32762 | 60 | 64 | <0.01 | ||
ZUR063 | R32763 | 64 | 68 | <0.01 | ||
ZUR063 | R32764 | 68 | 72 | 0.22 | ||
ZUR063 | R32765 | 72 | 76 | 5.74 | ||
ZUR063 | R32766 | 76 | 80 | <0.01 | ||
ZUR063 | R32767 | 80 | 84 | <0.01 | ||
ZUR063 | R32768 | 84 | 88 | 0.37 | ||
ZUR063 | R32769 | 88 | 90 | 0.14 | ||
ZURC006 | R40492 | 1 | 2 | 0.06 | ||
ZURC006 | R40494 | 3 | 4 | 0.03 | ||
ZURC006 | R40496 | 5 | 6 | 0.01 | ||
ZURC006 | R40498 | 7 | 8 | 0.02 | ||
ZURC006 | R40500 | 9 | 10 | 0.01 | ||
ZURC006 | R40602 | 11 | 12 | 0.01 | ||
ZURC006 | R40604 | 13 | 14 | 0.01 | ||
ZURC006 | R40606 | 15 | 16 | 0.02 | ||
ZURC006 | R40608 | 17 | 18 | 0.05 | ||
ZURC006 | R40610 | 19 | 20 | 0.05 |
Page 18 / 20
Hole ID | Sample | From | To | Au | |||
ZURC006 | R40612 | 21 | 22 | <0.01 | |||
ZURC006 | R40614 | 23 | 24 | <0.01 | |||
ZURC006 | R40616 | 25 | 26 | 0.01 | |||
ZURC006 | R40618 | 27 | 28 | 0.01 | |||
ZURC006 | R40620 | 29 | 30 | <0.01 | |||
ZURC006 | R40622 | 31 | 32 | 0.01 | |||
ZURC006 | R40624 | 33 | 34 | 0.01 | |||
ZURC006 | R40626 | 35 | 36 | 0.01 | |||
ZURC006 | R40628 | 37 | 38 | 0.01 | |||
ZURC006 | R40630 | 39 | 40 | 0.01 | |||
ZURC006 | R40632 | 41 | 42 | 0.01 | |||
ZURC006 | R40634 | 43 | 44 | 0.01 | |||
ZURC006 | R40636 | 45 | 46 | 0.01 | |||
ZURC006 | R40638 | 47 | 48 | 0.01 | |||
ZURC006 | R40640 | 49 | 50 | 0.01 | |||
ZURC006 | R40642 | 51 | 52 | 0.01 | |||
ZURC006 | R40644 | 53 | 54 | 0.01 | |||
ZURC006 | R40646 | 55 | 56 | <0.01 | |||
ZURC006 | R40648 | 57 | 58 | 0.01 | |||
ZURC006 | R40650 | 59 | 60 | 0.01 | |||
ZURC006 | R40652 | 61 | 62 | 0.01 | |||
ZURC006 | R40654 | 63 | 64 | <0.01 | |||
ZURC006 | R40656 | 65 | 66 | 0.01 | |||
ZURC006 | R40658 | 67 | 68 | 0.01 | |||
ZURC006 | R40660 | 69 | 70 | 0.01 | |||
ZURC006 | R40661 | 70 | 71 | <0.01 | |||
ZURC006 | R40662 | 71 | 72 | 0.01 | |||
ZURC006 | R40663 | 72 | 73 | 0.01 | |||
ZURC006 | R40664 | 73 | 74 | 0.21 | |||
ZURC006 | R40665 | 74 | 75 | 0.11 | |||
ZURC006 | R40666 | 75 | 76 | 0.12 | |||
ZURC006 | R40667 | 76 | 77 | 0.04 | |||
ZURC006 | R40668 | 77 | 78 | 0.04 | |||
ZURC006 | R40669 | 78 | 79 | 0.02 | |||
ZURC006 | R40670 | 79 | 80 | 0.07 | |||
ZURC006 | R40671 | 80 | 81 | 0.03 | |||
ZURC006 | R40672 | 81 | 82 | 0.03 | |||
ZURC006 | R40673 | 82 | 83 | 0.01 | |||
ZURC006 | R40674 | 83 | 84 | 0.98 | |||
ZURC006 | R40675 | 84 | 85 | 50.40 | |||
ZURC006 | R40676 | 85 | 86 | 0.79 | |||
ZURC006 | R40677 | 86 | 87 | 0.56 | |||
ZURC006 | R40678 | 87 | 88 | 0.11 | |||
ZURC006 | R40679 | 88 | 89 | 0.39 | |||
ZURC006 | R40680 | 89 | 90 | 0.39 | |||
ZURC006 | R40681 | 90 | 91 | 1.06 | |||
ZURC006 | R40682 | 91 | 92 | 0.53 | |||
ZURC006 | R40683 | 92 | 93 | 0.86 | |||
ZURC006 | R40684 | 93 | 94 | 0.23 | |||
ZURC006 | R40685 | 94 | 95 | 0.75 | |||
ZURC006 | R40686 | 95 | 96 | 0.17 |
Page 19 / 20
Hole ID | Sample | From | To | Au | |||||
ZURC006 | R40687 | 96 | 97 | 0.71 | |||||
ZURC006 | R40688 | 97 | 98 | 0.37 | |||||
ZURC006 | R40689 | 98 | 99 | 0.44 | |||||
ZURC006 | R40690 | 99 | 100 | 0.11 | |||||
ZURC006 | R40691 | 100 | 101 | 0.35 | |||||
ZURC006 | R40692 | 101 | 102 | 0.20 | |||||
ZURC006 | R40693 | 102 | 103 | 0.66 | |||||
ZURC006 | R40694 | 103 | 104 | 0.20 | |||||
ZURC006 | R40695 | 104 | 105 | 1.05 | |||||
ZURC006 | R40696 | 105 | 106 | 0.22 | |||||
ZURC006 | R40697 | 106 | 107 | 0.26 | |||||
ZURC006 | R40698 | 107 | 108 | 0.39 | |||||
ZURC006 | R40699 | 108 | 109 | 1.04 | |||||
ZURC006 | R40700 | 109 | 110 | 0.20 | |||||
ZURC006 | R40501 | 110 | 111 | 0.09 | |||||
ZURC006 | R40502 | 111 | 112 | 0.03 | |||||
ZURC006 | R40504 | 113 | 114 | 0.01 | |||||
ZURC006 | R40506 | 115 | 116 | 0.01 | |||||
CTRLAD301 | C704482 | 0 | 4 | (0.01) | |||||
CTRLAD301 | C704483 | 4 | 8 | (0.01) | |||||
CTRLAD301 | C704484 | 8 | 12 | (0.01) | |||||
CTRLAD301 | C704485 | 12 | 16 | (0.01) | |||||
CTRLAD301 | C704486 | 16 | 20 | 0.02 | |||||
CTRLAD301 | C704487 | 20 | 24 | (0.01) | |||||
CTRLAD301 | C704488 | 24 | 28 | (0.01) | |||||
CTRLAD301 | C704489 | 28 | 32 | (0.01) | |||||
CTRLAD301 | C704490 | 32 | 36 | (0.01) | |||||
CTRLAD301 | C704491 | 36 | 40 | (0.01) | |||||
CTRLAD301 | C704492 | 40 | 44 | 2.01 | |||||
CTRLAD301 | C704493 | 44 | 48 | 0.48 | |||||
CTRLAD301 | C704494 | 48 | 52 | 0.04 | |||||
CTRLAD301 | C704495 | 52 | 56 | 0.03 | |||||
CTRLAD301 | C704496 | 56 | 60 | 0.03 | |||||
CTRLAD301 | C704497 | 60 | 64 | 0.03 | |||||
CTRLAD301 | C704498 | 64 | 65 | 0.04 |
Page 20 / 20
Appendix B
JORC Tables, JORC Code, 2012 Edition
Section 1: Sampling Techniques and Data
Section 2: Reporting of Exploration Results
JORC Code, 2012 Edition:
Section 1: Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria | JORC Code explanation | ||||
Sampling | • Nature and quality of sampling (eg cut channels, | ||||
techniques | random chips, or specific specialised industry | ||||
standard measurement tools appropriate to the | |||||
minerals under investigation, such as down hole | |||||
gamma sondes, or handheld XRF instruments, etc). | |||||
These examples should not be taken as limiting the | |||||
broad meaning of sampling. | |||||
• Include reference to measures taken to ensure | |||||
sample representivity and the appropriate calibration | |||||
of any measurement tools or systems used. | |||||
• Aspects of the determination of mineralisation that are | |||||
Material to the Public Report. | |||||
• In cases where 'industry standard' work has been | |||||
done this would be relatively simple (eg 'reverse | |||||
circulation drilling was used to obtain 1 m samples | |||||
from which 3 kg was pulverised to produce a 30 g | |||||
charge for fire assay'). In other cases more | |||||
explanation may be required, such as where there is | |||||
coarse gold that has inherent sampling problems. | |||||
Unusual commodities or mineralisation types (eg | |||||
submarine nodules) may warrant disclosure of | |||||
detailed information. | |||||
Drilling | • Drill type (eg core, reverse circulation, open-hole | ||||
techniques | hammer, rotary air blast, auger, Bangka, sonic, etc) | ||||
and details (eg core diameter, triple or standard tube, | |||||
depth of diamond tails, face-sampling bit or other | |||||
type, whether core is oriented and if so, by what | |||||
method, etc). |
Commentary
- Results reported are from previous exploration completed by Torian Resources and historical explorers including Pan Continental Resources, Homestake, Barrick Exploration, Norton Goldfields,
- A variety of techniques have been used, from Bedrock RAB and Aircore to Reverse circulation and NQ diamond Drilling. Standard industry techniques have been used where documented. The drilling was undertaken in a period where face sampling hammer was standard for RC drilling.
Drill sample | • Method of recording and assessing core and chip |
recovery | sample recoveries and results assessed. |
• Measures taken to maximise sample recovery and | |
ensure representative nature of the samples. | |
• Whether a relationship exists between sample | |
recovery and grade and whether sample bias may | |
have occurred due to preferential loss/gain of | |
fine/coarse material. | |
Logging | • Whether core and chip samples have been |
geologically and geotechnically logged to a level of | |
detail to support appropriate Mineral Resource | |
estimation, mining studies and metallurgical studies. | |
• Whether logging is qualitative or quantitative in | |
nature. Core (or costean, channel, etc) photography. | |
• The total length and percentage of the relevant | |
intersections logged. |
- Drill recovery has not been recorded on historical work.
- Geological logs have been examined for key prospects where available. Geological logging of regolith has occurred in most drillholes allowing interpretation of primary vs Supergene zones.
1
Criteria | JORC Code explanation | ||||
Commentary
Sub-sampling techniques and sample preparation
Quality of
assay data and laboratory tests
Verification of sampling and assaying
Location of data points
Data spacing and distribution
Orientation of
data in
relation to geological structure
- If core, whether cut or sawn and whether quarter, half or all core taken.
- If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.
- For all sample types, the nature, quality and appropriateness of the sample preparation technique.
- Quality control procedures adopted for all sub- sampling stages to maximise samples representivity
- Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling.
- Whether sample sizes are appropriate to the grain size of the material being sampled.
- The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.
- For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.
- Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.
- The verification of significant intersections by either independent or alternative company personnel.
- The use of twinned holes.
- Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.
- Discuss any adjustment to assay data.
- Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.
- Specification of the grid system used.
- Quality and adequacy of topographic control.
- Data spacing for reporting of Exploration Results.
- Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.
- Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.
- If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.
- Standard industry practices have been undertaken but QA/QC data is not present in the historical data. It is considered that aapropriate sampling and analytical methods have been used by all explorers. Some standards and blanks have been inserted into the Torian drill sampling. .
- Gold assays are a combination of Aqua regia and Fire Assay. Detection limits and techniques are appropriate for included results.
- Intercepts have been calculated generally using a 1g/t cut off and internal waste of up to 2m thickness with total intercepts greater than 1g/t.
- Location of a majority of holes has been using handheld GPS, or local grids that have been converted to MGA coordinates
- Variable across the project as shown on diagrams.
- Intercepts given are downhole widths with the true widths not determined.
2
Criteria | JORC Code explanation | |||||
Sample | • | The measures taken to ensure sample security. | ||||
security | ||||||
Audits | or • | The results of any audits or reviews of sampling | ||||
reviews | techniques and data. | |||||
Commentary
- Not applicable to historical data review
- Review of data in key areas has been undertaken with ongoing QA/QC on the remainder of the data within the project areas being ongoing.
3
Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria | JORC Code explanation | ||||
Mineral tenement | • Type, reference name/number, location and | ||||
and land tenure | ownership including agreements or material | ||||
status | issues with third parties such as joint ventures, | ||||
partnerships, overriding royalties, native | |||||
title interests, historical sites, wilderness or national | |||||
park and environmental settings. | |||||
• The security of the tenure held at the time of reporting | |||||
along with any known impediments to obtaining a | |||||
licence to operate in the area. | |||||
Commentary
-
Located in the Norseman - Wiluna Greenstone Belt ~35km northwest of Kalgoorlie in the Eastern Goldfields mining district in
WA - All granted tenements held and maintained by Torian Resources Limited and are in good standing.
- Dampier Mining Ltd have the opportunity to earn up to 50% in the Credo Well Project Tenements and up to 75% in the Zuleika Project Tenements through expenditure over 4 years of $A2M and $A4M respectively
Exploration done | • Acknowledgment and appraisal of exploration by |
by other parties. | other parties. |
- Extensive previous work by Pan Continental Resources, Homestake, Barrack Exploration, Norton Goldfields
- Data compiled from: WAMEX reports listed following this table1
Geology | • Deposit type, geological setting and style of |
mineralisation. | |
Drill | hole | • A summary of all information material to the |
Information | understanding of the exploration results including | |
a tabulation of the following information for all | ||
Material drill holes: | ||
§ easting and northing of the drill | ||
hole collar | ||
§ elevation or RL (Reduced Level | ||
- elevation above sea level in | ||
metres) of the drill hole collar • |
- Gold mineralisation at Credo and Zuleika projects is orogenic, hosted within sheared and faulted Volcanics, Sediments, felsic, mafic and ultramafic rocks. Mineralisation is hosted in shear zones and controlled by regional structures
- Location of Drillholes based on historical reports and data, originally located on GPS.
- Northing and easting data generally within 10m accuracy
- RL data +/-20m
- Down hole length =+- 0.2 m
4
Criteria
Data aggregation methods
Relationship between mineralisatio n widths and intercept lengths
Diagrams
JORC Code explanation
dip and azimuth of the hole
§ down hole length and interception depth
- hole length.
- If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.
- In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated.
- Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated.
- These relationships are particularly important in the reporting of Exploration Results.
- If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.
- If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').
- Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.
Commentary
- Intercepts have been calculated generally using a 1g/t cut off and internal waste of up to 2m thickness with total intercepts greater than 1g/t.
- No upper cut off has been applied to intersections.
- Orientation of mineralised zones are still to be ascertained
• The data has been presented |
using appropriate scales and |
using standard aggregating |
techniques for the display of |
regional data. Geological |
and mineralisation |
interpretations are based on |
current knowledge and will |
change with further |
exploration. |
Balanced | • Where comprehensive reporting of all |
reporting | Exploration Results is not practicable, |
representative reporting of both low and high | |
grades and/or widths should be practiced to avoid | |
misleading reporting of Exploration Results. | |
• All results have previously |
been reported by Torian - |
see TNR:ASX |
Announcements dated: |
10/7/2018, 03/05/2018, |
25/07/2017, 07/03/2017, |
04/02/2017, 02/12/2015. |
5
Criteria
Other substantive exploration data
Further work
JORC Code explanation
-
Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating substances. - The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scalestep-out drilling).
- Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.
Commentary
- Geological interpretations are taken from published maps, historical and ongoing exploration. Many of the prospects are at an early exploration stage and further work will enhance the understanding of the area.
- Further work currently underway is a full project review identifying and ranking targets
- Drill testing of these targets is planned as soon as practical following the finalisation of the JV.
1WAMEX reports containing historical data from the project:
A103166, A109048, A11806, A12213, A13225, A13866, A14575, A14682, A15227, A15339, A15453, A15801, A15807, A15905, A17115, A17116, A17800, A17878, A18003, A18161, A19011, A19012, A19161, A19261, A19321, A19396, A19510, A19519, A19935, A19945, A20030, A20051, A20320, A20720, A20767, A20833, A20990, A21078, A21090, A21233, A21270, A21482, A21627, A21637, A21671, A22057, A22072, A22225, A22925, A23140, A23187, A23435, A23436, A23535, A23610, A23611, A23793, A23921, A24113, A24114, A24519, A24687, A25080, A25482, A25733, A25820, A25821, A25822, A26598, A27605, A28039, A29456, A29457, A29795, A29841, A30972, A30973, A31267, A31268, A31366, A31512, A31522, A32409, A32946, A34217, A34378, A34912, A36414, A36651, A37222, A37470, A38577, A39814, A39832, A40363, A40364, A40685, A40921, A42077, A42720, A42920, A44289, A44409, A44520, A44712, A45299, A45959, A47898, A47900, A49387, A49729, A49752, A50362, A51241, A51281, A51557, A51915, A52497, A53057, A53115, A53256, A53421, A54403, A54527, A54686, A54773, A54857, A55230, A55746, A5660, A57388, A57465, A58280, A58889, A59091, A59956, A60329, A60612, A60969, A61148, A61372, A61955, A62574, A65102, A65210, A65458, A65501, A66658, A67339, A67355, A67548, A67704, A68508, A68748, A68756, A69172, A69239, A70545, A70687, A70914, A71561, A72494, A73182, A73632, A75401, A76035, A78766, A79331, A79375, A85252, A91989, A57420, A59880, A59303, A68695, A94096
6
Attachments
- Original document
- Permalink
Disclaimer
Dampier Gold Ltd. published this content on 10 January 2020 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 10 January 2020 00:37:00 UTC