Metalsearch Limited announced the XRF results of the -20um fraction from five more drill holes at the Abercorn Project. Air Core Drilling Program: The Company completed a 62-hole Air Core drilling program for 2,358 metres on the Project with depths ranging from 23 to 51 metres, for an average depth of 38 metres. The total number of holes drilled within the Project is now 86 for a total of 3,172m. The Company is encouraged by the positive intersections of high quality kaolin. Drill hole ABAC 63 is located in the central body of the main prospect area ~700m SSE of the previously reported high grade hole ABAC 53 (20m @ 30% Al2O3) and ~200m NW of the Company's highest quality historical hole (CK14). Hole CK14 intersected 25m of high-quality kaolin. These results confirm the high quality nature of mineralization at the Project. The consistent nature of the surficial 20m thick horizon of excellent quality kaolin is highly encouraging. Drill hole ABAC 64 is located in the central body of the main prospect area ~145m SW of the above hole ABAC 63 and ~200m W of the Company's highest quality historical hole (CK14) as referred above. Drill hole ABAC 64 was drilled to a total depth of 35m however XRF assays have only been received for the first 30m. The remaining assays from this drill hole are unlikely to change the high grade section shown above. The results of the remaining samples from this hole will be announced when they have been received. Drill holes ABAC 26, 27 & 29 were drilled at a satellite target approximately 2km southwest of the main prospect area, i.e. 180m SE, 100m SE and 180m NW of previously reported hole ABAC 25. The excellent results from holes ABAC 25, 26, 27 & 29 give encouragement that this area will make a significant contribution to the maiden JORC resource to be reported and that this area can be expanded significantly, confirming the overall large scale potential of the project area. Geochemical samples were submitted to ALS Global for analysis and spectral mineralogy determinations. The spectral data has been received with very encouraging results. Drilling Results: The results for the second batch of 5 holes have confirmed the high grades received in the first three holes. These results continue to exceed expectations, reporting an average grade of Al2O3 (alumina) contained in the -20um fraction of 30.8% Al2O3, confirming the high-quality nature of mineralization at the Project. Drill hole ABAC 27 was drilled to a total depth of 32m with 14m @ 30.1% Al2O3 from 0m to 14m - no overburden. Drill hole ABAC 26 was drilled to a total depth of 37m with 5m @ 30.3% Al2O3 from 1m to 6m, 1m of overburden. Drill hole ABAC 29 was drilled to a total depth of 39m with 17m @ 31.3% Al2O3 from 0m to 17m - no overburden. Drill hole ABAC 63 was drilled to a total depth of 45m with 27m @ 31.2% Al2O3 from 0m to 27m - no overburden. Drill hole ABAC 64 was drilled to a total depth of 35m with 23m @ 32.1% Al2O3 from 0m to 23m - no overburden.